avr/Makefile

@@ -4,11 +4,11 @@
 
 all: flash
 
-noiseplug.o: noiseplug.s
+noiseplug.o: noiseplug.S
-	avr-gcc -Os -nostdlib -mmcu=attiny13 -o $@ -c $<
+	avr-gcc -Os -nostdlib -mmcu=attiny9 -o $@ -c $<
 
 noiseplug.elf: noiseplug.o
-	avr-gcc -Os -nostdlib -mmcu=attiny13 -o $@ $<
+	avr-gcc -Os -nostdlib -mmcu=attiny9 -o $@ $<
 
 noiseplug.hex: noiseplug.elf
 	avr-objcopy -O ihex $< $@

avr/noiseplug.s

@@ -5,16 +5,21 @@
 .global __vectors
 
 SREG = 0x3F
+SPH = 0x3E
 SPL = 0x3D
-TIMSK0 = 0x39
+CCP = 0x3C
-TIFR0 = 0x38
+SMCR = 0x3A
-OCR0A = 0x36
+CLKPSR = 0x36
-MCUCR = 0x35
+TCCR0A = 0x2E
-TCCR0B = 0x33
+TCCR0B = 0x2D
-TCCR0A = 0x2F
+TCCR0C = 0x2C
-CLKPS = 0x26
+TIMSK0 = 0x2B
-PORTB = 0x18
+TIFR0 = 0x2A
-DDRB = 0x17
+OCR0AL = 0x26
+PUEB = 0x03
+PORTB = 0x02
+DDRB = 0x01
+PINB = 0x00
 
 LEADSIZE = 174
 LEADINIT1 = 1601
@@ -38,48 +43,40 @@ LEADINIT2 = 3571
 
 __vectors:
 NULL:
-	; this next three instructions of the code are sitting
+	clr r16
-	; in the place of the vectors for interrupts 0, 1 and 2
+	ldi r17, 0xD8
-	; it doesn't matter because we are only using interrupt 3
+	out PUEB, r16
-	ldi r30, 0x60
-	ldi r18, LEADSIZE
 	rjmp main_cont
 	
-	.type	__vector_3, @function
+	.type	__vector_4, @function
-__vector_3:
+__vector_4:
 	push r16
 	in r16, SREG
 	push r16
 	lds r16,int_ctr
 	subi r16, -1
-	cpi r16, 5  ; count up to 5, not 4
+	andi r16, 3
-	brne no_overflow
-	ldi r16, 0
-no_overflow:
 	sts int_ctr, r16
 	pop r16
 	out SREG, r16
 	pop r16
 	reti
-	.size	__vector_3, .-__vector_3
+	.size	__vector_4, .-__vector_4
 	
 main_cont:
+	clr r31
+	ldi r30, 0x40
 	
-	; this is not really needed, but enable if it makes you feel better
+clear_sram:
-	;clr r16
+	st Z+, r16
-;clear_sram:
+	sbrs r30, 5
-;	st Z+, r16
+	rjmp clear_sram
-;	ldi r19, 0x9F
-;	cpse r30, r19
-;	rjmp clear_sram
 
-	; the stack is automatically set up by the attiny13, but
+	ldi r18, 0x5F
-	; this next two lines do it if you still want to do it
+	out SPL, r18
-	; note that the attiny13 doesn't have a SPH, since it doesn't
+	out SPH, r16
-	; have that much memory anyway
-	;ldi r18, 0x9F
-	;out SPL, r18
 
+	ldi r18, LEADSIZE
 	sts lead1, r18
 	sts lead2, r18
 	sts lead3, r18
@@ -92,37 +89,22 @@ main_cont:
 	ldi r18, lo8(LEADINIT2)
 	sts lead3 + 3, r18
 
-	; set clock divisor = 1, ~9mhz
+	out CCP, r17
-	ldi r17, 128
+	out CLKPSR, r16
-	ldi r16, 0
-	out CLKPS, r17
-	out CLKPS, r16
-
-	; set portb0 and portb3 as output pins
 	ldi r17, 5
 	out DDRB, r17
-	out PORTB, r16
+	ldi r17, 0x81
-
-	; set pwm to fast pwm
-	ldi r17, 0x83
 	out TCCR0A, r17
-	ldi r17, 0x01
+	ldi r17, 0x09
 	out TCCR0B, r17
-
+	ldi r17, 1
-	; enable sleep, idle mode and disable pullups
+	out SMCR, r17
-	ldi r17, 96
-	out MCUCR, r17
-
-	; set interrupts
-	ldi r17, 2
 	out TIMSK0, r17
-
-	; enable interrupts
 	sei
 	out TIFR0, r17
 
 	; YH and ZH never change
-	ldi r31, hi8(notes)
+	ldi r31, hi8(bassline+0x4000)
 	clr r29
 	
 	; init i
@@ -175,11 +157,11 @@ norestart:
 	; note = notes[bassline[bassptr]]
 	ldi r30, lo8(bassline)
 	add r30, r20
-	lpm r20, Z
+	ld r20, Z
 	ldi r30, lo8(notes)
 	add r30, r20
-	lpm r21, Z+
+	ld r21, Z+
-	lpm r20, Z
+	ld r20, Z
 	
 	; if (bassbeat[(i >> 10) & 7]): note <<= 1
 	mov r22, r18
@@ -188,7 +170,7 @@ norestart:
 	andi r22, 7
 	ldi r30, lo8(bassbeat)
 	add r30, r22
-	lpm r22, Z
+	ld r22, Z
 	tst r22				; assuming this resets C
 	breq nobassbeat
 	rol r21
@@ -237,7 +219,7 @@ noaddbass:
 	; arpptr(r30) = arpseq1[arpseq2[i >> 16]][(i >> 14) & 3]
 	mov r30, r17
 	subi r30, lo8(NULL-arpseq2)
-	lpm r30, Z
+	ld r30, Z
 	lsl r30
 	lsl r30
 	mov r20, r18
@@ -247,7 +229,7 @@ noaddbass:
 	andi r20, 3
 	or r30, r20
 	subi r30, lo8(NULL-arpseq1)
-	lpm r30, Z
+	ld r30, Z
 	
 	; if (!(i & (1 << 13))): arpptr >>= 14
 	sbrs r18, 5
@@ -260,7 +242,7 @@ noaddbass:
 	andi r20, 1
 	or r30, r20
 	subi r30, lo8(NULL-arpeggio)
-	lpm r30, Z
+	ld r30, Z
 	
 	; if (!(i & 0x80)): arpptr >>= 14
 	sbrs r19, 7
@@ -270,8 +252,8 @@ noaddbass:
 	andi r30, 0xF
 	lsl r30
 	subi r30, lo8(NULL-arpnotes)
-	lpm r21, Z+
+	ld r21, Z+
-	lpm r20, Z
+	ld r20, Z
 	
 	; arp_osc += note
 	lds r22, arposc
@@ -291,7 +273,7 @@ noaddbass:
 	swap r30
 	andi r30, 3
 	subi r30, lo8(NULL-arptiming)
-	lpm r20, Z
+	ld r20, Z
 	
 	; if (!((r20 << ((i >> 9) & 7)) & 0x80)): break arp
 	mov r21, r18
@@ -342,7 +324,7 @@ noarp:
 	lsr r23
 	add r16, r23
 
-	out OCR0A, r16
+	out OCR0AL, r16
 	
 	cbi PORTB, 2
 	rjmp mainloop
@@ -410,13 +392,13 @@ getleaddata:
 	swap r30
 	andi r30, 0xF
 	subi r30, lo8(NULL-leadseq)
-	lpm r30, Z
+	ld r30, Z
 	swap r30
 	or r30, r23
 	
 	; data = leaddata[leadptr]
 	subi r30, lo8(NULL-leaddata)
-	lpm r24, Z					; r24 = data!
+	ld r24, Z					; r24 = data!
 	
 	; if (0 == leadtimer) {
 	com r25
@@ -429,7 +411,7 @@ getleaddata:
 		lsr r30
 		andi r30, 7
 		subi r30, lo8(NULL-leadtimes)
-		lpm r27, Z
+		ld r27, Z
 		st Y, r27
 	
 		; boosts |= boostmask
@@ -444,8 +426,8 @@ noleadupdate:
 	ldi r30, lo8(notes)
 	lsl r24
 	add r30, r24
-	lpm r21, Z+
+	ld r21, Z+
-	lpm r20, Z
+	ld r20, Z
 	
 	; leadosc += note
 	inc r28
@@ -487,9 +469,9 @@ skiplead:
 	.org 0x300
 	
 notes:
-	.word 	-1, 112, 133, 149, 167
+	.word 	-1, 134, 159, 179, 201
 arpnotes:
-	.word	177, 199, 223, 251, 265, 298, 335, 354, 375, 398, 447, 501, 531, 596
+	.word	213, 239, 268, 301, 319, 358, 401, 425, 451, 477, 536, 601, 637, 715
 	
 bassline:
 	.byte	14, 14, 18, 12, 14, 14, 20, 12, 14, 14, 18, 8, 10, 10, 4, 8