rtl8723cs/include/rtw_rf.h

238 lines
6.5 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTW_RF_H_
#define __RTW_RF_H_
#define OFDM_PHY 1
#define MIXED_PHY 2
#define CCK_PHY 3
#define NumRates (13)
// slot time for 11g
#define SHORT_SLOT_TIME 9
#define NON_SHORT_SLOT_TIME 20
#define RTL8711_RF_MAX_SENS 6
#define RTL8711_RF_DEF_SENS 4
//
// We now define the following channels as the max channels in each channel plan.
// 2G, total 14 chnls
// {1,2,3,4,5,6,7,8,9,10,11,12,13,14}
// 5G, total 24 chnls
// {36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,165}
#define MAX_CHANNEL_NUM_2G 14
#define MAX_CHANNEL_NUM_5G 24
#define MAX_CHANNEL_NUM 38//14+24
#define CENTER_CH_2G_NUM 14
#define CENTER_CH_5G_20M_NUM 28 /* 20M center channels */
#define CENTER_CH_5G_40M_NUM 14 /* 40M center channels */
#define CENTER_CH_5G_80M_NUM 7 /* 80M center channels */
#define CENTER_CH_5G_ALL_NUM (CENTER_CH_5G_20M_NUM + CENTER_CH_5G_40M_NUM + CENTER_CH_5G_80M_NUM)
extern u8 center_ch_5g_20m[CENTER_CH_5G_20M_NUM];
extern u8 center_ch_5g_40m[CENTER_CH_5G_40M_NUM];
extern u8 center_ch_5g_80m[CENTER_CH_5G_80M_NUM];
extern u8 center_ch_5g_all[CENTER_CH_5G_ALL_NUM];
u8 center_chs_5g_num(u8 bw);
u8 center_chs_5g(u8 bw, u8 id);
//#define NUM_REGULATORYS 21
#define NUM_REGULATORYS 1
//Country codes
#define USA 0x555320
#define EUROPE 0x1 //temp, should be provided later
#define JAPAN 0x2 //temp, should be provided later
struct regulatory_class {
u32 starting_freq; //MHz,
u8 channel_set[MAX_CHANNEL_NUM];
u8 channel_cck_power[MAX_CHANNEL_NUM];//dbm
u8 channel_ofdm_power[MAX_CHANNEL_NUM];//dbm
u8 txpower_limit; //dbm
u8 channel_spacing; //MHz
u8 modem;
};
typedef enum _CAPABILITY{
cESS = 0x0001,
cIBSS = 0x0002,
cPollable = 0x0004,
cPollReq = 0x0008,
cPrivacy = 0x0010,
cShortPreamble = 0x0020,
cPBCC = 0x0040,
cChannelAgility = 0x0080,
cSpectrumMgnt = 0x0100,
cQos = 0x0200, // For HCCA, use with CF-Pollable and CF-PollReq
cShortSlotTime = 0x0400,
cAPSD = 0x0800,
cRM = 0x1000, // RRM (Radio Request Measurement)
cDSSS_OFDM = 0x2000,
cDelayedBA = 0x4000,
cImmediateBA = 0x8000,
}CAPABILITY, *PCAPABILITY;
enum _REG_PREAMBLE_MODE{
PREAMBLE_LONG = 1,
PREAMBLE_AUTO = 2,
PREAMBLE_SHORT = 3,
};
enum _RTL8712_RF_MIMO_CONFIG_{
RTL8712_RFCONFIG_1T=0x10,
RTL8712_RFCONFIG_2T=0x20,
RTL8712_RFCONFIG_1R=0x01,
RTL8712_RFCONFIG_2R=0x02,
RTL8712_RFCONFIG_1T1R=0x11,
RTL8712_RFCONFIG_1T2R=0x12,
RTL8712_RFCONFIG_TURBO=0x92,
RTL8712_RFCONFIG_2T2R=0x22
};
typedef enum _RF_PATH {
RF_PATH_A = 0,
RF_PATH_B = 1,
RF_PATH_C = 2,
RF_PATH_D = 3,
} RF_PATH, *PRF_PATH;
#define rf_path_char(path) (((path) >= RF_PATH_MAX) ? 'X' : 'A' + (path))
// Bandwidth Offset
#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0
#define HAL_PRIME_CHNL_OFFSET_LOWER 1
#define HAL_PRIME_CHNL_OFFSET_UPPER 2
typedef enum _BAND_TYPE {
BAND_ON_2_4G = 0,
BAND_ON_5G = 1,
BAND_ON_BOTH = 2,
BAND_MAX = 3,
} BAND_TYPE, *PBAND_TYPE;
extern const char * const _band_str[];
#define band_str(band) (((band) >= BAND_MAX) ? _band_str[BAND_MAX] : _band_str[(band)])
extern const u8 _band_to_band_cap[];
#define band_to_band_cap(band) (((band) >= BAND_MAX) ? _band_to_band_cap[BAND_MAX] : _band_to_band_cap[(band)])
// Represent Channel Width in HT Capabilities
//
typedef enum _CHANNEL_WIDTH{
CHANNEL_WIDTH_20 = 0,
CHANNEL_WIDTH_40 = 1,
CHANNEL_WIDTH_80 = 2,
CHANNEL_WIDTH_160 = 3,
CHANNEL_WIDTH_80_80 = 4,
CHANNEL_WIDTH_MAX = 5,
}CHANNEL_WIDTH, *PCHANNEL_WIDTH;
extern const char * const _ch_width_str[];
#define ch_width_str(bw) (((bw) >= CHANNEL_WIDTH_MAX) ? _ch_width_str[CHANNEL_WIDTH_MAX] : _ch_width_str[(bw)])
extern const u8 _ch_width_to_bw_cap[];
#define ch_width_to_bw_cap(bw) (((bw) >= CHANNEL_WIDTH_MAX) ? _ch_width_to_bw_cap[CHANNEL_WIDTH_MAX] : _ch_width_to_bw_cap[(bw)])
//
// Represent Extention Channel Offset in HT Capabilities
// This is available only in 40Mhz mode.
//
typedef enum _EXTCHNL_OFFSET{
EXTCHNL_OFFSET_NO_EXT = 0,
EXTCHNL_OFFSET_UPPER = 1,
EXTCHNL_OFFSET_NO_DEF = 2,
EXTCHNL_OFFSET_LOWER = 3,
}EXTCHNL_OFFSET, *PEXTCHNL_OFFSET;
typedef enum _VHT_DATA_SC{
VHT_DATA_SC_DONOT_CARE = 0,
VHT_DATA_SC_20_UPPER_OF_80MHZ = 1,
VHT_DATA_SC_20_LOWER_OF_80MHZ = 2,
VHT_DATA_SC_20_UPPERST_OF_80MHZ = 3,
VHT_DATA_SC_20_LOWEST_OF_80MHZ = 4,
VHT_DATA_SC_20_RECV1 = 5,
VHT_DATA_SC_20_RECV2 = 6,
VHT_DATA_SC_20_RECV3 = 7,
VHT_DATA_SC_20_RECV4 = 8,
VHT_DATA_SC_40_UPPER_OF_80MHZ = 9,
VHT_DATA_SC_40_LOWER_OF_80MHZ = 10,
}VHT_DATA_SC, *PVHT_DATA_SC_E;
typedef enum _PROTECTION_MODE{
PROTECTION_MODE_AUTO = 0,
PROTECTION_MODE_FORCE_ENABLE = 1,
PROTECTION_MODE_FORCE_DISABLE = 2,
}PROTECTION_MODE, *PPROTECTION_MODE;
typedef enum _RT_RF_TYPE_DEFINITION
{
RF_1T2R = 0,
RF_2T4R = 1,
RF_2T2R = 2,
RF_1T1R = 3,
RF_2T2R_GREEN = 4,
RF_2T3R = 5,
RF_3T3R = 6,
RF_3T4R = 7,
RF_4T4R = 8,
RF_MAX_TYPE = 0xF, /* u1Byte */
}RT_RF_TYPE_DEF_E;
int rtw_ch2freq(int chan);
int rtw_freq2ch(int freq);
bool rtw_chbw_to_freq_range(u8 ch, u8 bw, u8 offset, u32 *hi, u32 *lo);
int rtw_get_chplan_from_country(const char *country_code);
#define BB_GAIN_2G 0
#ifdef CONFIG_IEEE80211_BAND_5GHZ
#define BB_GAIN_5GLB1 1
#define BB_GAIN_5GLB2 2
#define BB_GAIN_5GMB1 3
#define BB_GAIN_5GMB2 4
#define BB_GAIN_5GHB 5
#endif
#ifdef CONFIG_IEEE80211_BAND_5GHZ
#define BB_GAIN_NUM 6
#else
#define BB_GAIN_NUM 1
#endif
int rtw_ch_to_bb_gain_sel(int ch);
void rtw_rf_set_tx_gain_offset(_adapter *adapter, u8 path, s8 offset);
void rtw_rf_apply_tx_gain_offset(_adapter *adapter, u8 ch);
bool rtw_is_dfs_range(u32 hi, u32 lo);
bool rtw_is_dfs_ch(u8 ch, u8 bw, u8 offset);
bool rtw_is_long_cac_range(u32 hi, u32 lo);
bool rtw_is_long_cac_ch(u8 ch, u8 bw, u8 offset);
#endif //_RTL8711_RF_H_