rtl8723cs/include/rtw_btcoex.h
2017-01-30 21:28:09 +01:00

437 lines
18 KiB
C

/******************************************************************************
*
* Copyright(c) 2013 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTW_BTCOEX_H__
#define __RTW_BTCOEX_H__
#include <drv_types.h>
/* For H2C: H2C_BT_MP_OPER. Return status definition to the user layer */
typedef enum _BT_CTRL_STATUS {
BT_STATUS_SUCCESS = 0x00, /* Success */
BT_STATUS_BT_OP_SUCCESS = 0x01, /* bt fw op execution success */
BT_STATUS_H2C_SUCCESS = 0x02, /* H2c success */
BT_STATUS_H2C_FAIL = 0x03, /* H2c fail */
BT_STATUS_H2C_LENGTH_EXCEEDED = 0x04, /* H2c command length exceeded */
BT_STATUS_H2C_TIMTOUT = 0x05, /* H2c timeout */
BT_STATUS_H2C_BT_NO_RSP = 0x06, /* H2c sent, bt no rsp */
BT_STATUS_C2H_SUCCESS = 0x07, /* C2h success */
BT_STATUS_C2H_REQNUM_MISMATCH = 0x08, /* bt fw wrong rsp */
BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x08, /* Upper layer OP code version mismatch. */
BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x0a, /* Lower layer OP code version mismatch. */
BT_STATUS_UNKNOWN_OPCODE_U = 0x0b, /* Unknown Upper layer OP code */
BT_STATUS_UNKNOWN_OPCODE_L = 0x0c, /* Unknown Lower layer OP code */
BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0d, /* Wrong parameters sent by upper layer. */
BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0e, /* bt fw parameter format is not consistency */
BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0f, /* uppery layer parameter value is out of range */
BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x10, /* bt fw parameter value is out of range */
BT_STATUS_UNKNOWN_STATUS_L = 0x11, /* bt returned an defined status code */
BT_STATUS_UNKNOWN_STATUS_H = 0x12, /* driver need to do error handle or not handle-well. */
BT_STATUS_WRONG_LEVEL = 0x13, /* should be under passive level */
BT_STATUS_NOT_IMPLEMENT = 0x14, /* op code not implemented yet */
BT_STATUS_BT_STACK_OP_SUCCESS = 0x15, /* bt stack op execution success */
BT_STATUS_BT_STACK_NOT_SUPPORT = 0x16, /* stack version not support this. */
BT_STATUS_BT_STACK_SEND_HCI_EVENT_FAIL = 0x17, /* send hci event fail */
BT_STATUS_BT_STACK_NOT_BIND = 0x18, /* stack not bind wifi driver */
BT_STATUS_BT_STACK_NO_RSP = 0x19, /* stack doesn't have any rsp. */
BT_STATUS_MAX
} BT_CTRL_STATUS, *PBT_CTRL_STATUS;
#define SET_BT_MP_OPER_RET(OpCode, StatusCode) ((OpCode << 8) | StatusCode)
#define GET_OP_CODE_FROM_BT_MP_OPER_RET(RetCode) ((RetCode & 0xF0) >> 8)
#define GET_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode) (RetCode & 0x0F)
#define CHECK_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode, StatusCode) (GET_STATUS_CODE_FROM_BT_MP_OPER_RET(RetCode) == StatusCode)
#ifdef CONFIG_BT_COEXIST_SOCKET_TRX
#define NETLINK_USER 31
#define CONNECT_PORT 30000
#define CONNECT_PORT_BT 30001
#define KERNEL_SOCKET_OK 0x01
#define NETLINK_SOCKET_OK 0x02
#define OTHER 0
#define RX_ATTEND_ACK 1
#define RX_LEAVE_ACK 2
#define RX_BT_LEAVE 3
#define RX_INVITE_REQ 4
#define RX_ATTEND_REQ 5
#define RX_INVITE_RSP 6
#define invite_req "INVITE_REQ"
#define invite_rsp "INVITE_RSP"
#define attend_req "ATTEND_REQ"
#define attend_ack "ATTEND_ACK"
#define wifi_leave "WIFI_LEAVE"
#define leave_ack "LEAVE_ACK"
#define bt_leave "BT_LEAVE"
#define BT_INFO_NOTIFY_CMD 0x0106
#define BT_INFO_LEN 8
typedef struct _HCI_LINK_INFO{
u2Byte ConnectHandle;
u1Byte IncomingTrafficMode;
u1Byte OutgoingTrafficMode;
u1Byte BTProfile;
u1Byte BTCoreSpec;
s1Byte BT_RSSI;
u1Byte TrafficProfile;
u1Byte linkRole;
}HCI_LINK_INFO, *PHCI_LINK_INFO;
#define MAX_BT_ACL_LINK_NUM 8
typedef struct _HCI_EXT_CONFIG{
HCI_LINK_INFO aclLink[MAX_BT_ACL_LINK_NUM];
u1Byte btOperationCode;
u2Byte CurrentConnectHandle;
u1Byte CurrentIncomingTrafficMode;
u1Byte CurrentOutgoingTrafficMode;
u1Byte NumberOfACL;
u1Byte NumberOfSCO;
u1Byte CurrentBTStatus;
u2Byte HCIExtensionVer;
BOOLEAN bEnableWifiScanNotify;
}HCI_EXT_CONFIG, *PHCI_EXT_CONFIG;
typedef struct _HCI_PHY_LINK_BSS_INFO{
u2Byte bdCap; // capability information
// Qos related. Added by Annie, 2005-11-01.
//BSS_QOS BssQos;
}HCI_PHY_LINK_BSS_INFO, *PHCI_PHY_LINK_BSS_INFO;
typedef enum _BT_CONNECT_TYPE{
BT_CONNECT_AUTH_REQ =0x00,
BT_CONNECT_AUTH_RSP =0x01,
BT_CONNECT_ASOC_REQ =0x02,
BT_CONNECT_ASOC_RSP =0x03,
BT_DISCONNECT =0x04
}BT_CONNECT_TYPE,*PBT_CONNECT_TYPE;
typedef struct _PACKET_IRP_HCIEVENT_DATA {
u8 EventCode;
u8 Length; //total cmd length = extension event length+1(extension event code length)
u8 Data[1]; // byte1 is extension event code
} rtw_HCI_event;
struct btinfo_8761ATV {
u8 cid;
u8 len;
u8 bConnection:1;
u8 bSCOeSCO:1;
u8 bInQPage:1;
u8 bACLBusy:1;
u8 bSCOBusy:1;
u8 bHID:1;
u8 bA2DP:1;
u8 bFTP:1;
u8 retry_cnt:4;
u8 rsvd_34:1;
u8 bPage:1;
u8 TRxMask:1;
u8 Sniff_attempt:1;
u8 rssi;
u8 A2dp_rate:1;
u8 ReInit:1;
u8 MaxPower:1;
u8 bEnIgnoreWlanAct:1;
u8 TxPowerLow:1;
u8 TxPowerHigh:1;
u8 eSCO_SCO:1;
u8 Master_Slave:1;
u8 ACL_TRx_TP_low;
u8 ACL_TRx_TP_high;
};
#define HCIOPCODE(_OCF, _OGF) ((_OGF)<<10|(_OCF))
#define HCIOPCODELOW(_OCF, _OGF) (u8)(HCIOPCODE(_OCF, _OGF)&0x00ff)
#define HCIOPCODEHIGHT(_OCF, _OGF) (u8)(HCIOPCODE(_OCF, _OGF)>>8)
#define HCI_OGF(opCode) (unsigned char)((0xFC00 & (opCode)) >> 10)
#define HCI_OCF(opCode) ( 0x3FF & (opCode))
typedef enum _HCI_STATUS{
HCI_STATUS_SUCCESS =0x00, //Success
HCI_STATUS_UNKNOW_HCI_CMD =0x01, //Unknown HCI Command
HCI_STATUS_UNKNOW_CONNECT_ID =0X02, //Unknown Connection Identifier
HCI_STATUS_HW_FAIL =0X03, //Hardware Failure
HCI_STATUS_PAGE_TIMEOUT =0X04, //Page Timeout
HCI_STATUS_AUTH_FAIL =0X05, //Authentication Failure
HCI_STATUS_PIN_OR_KEY_MISSING =0X06, //PIN or Key Missing
HCI_STATUS_MEM_CAP_EXCEED =0X07, //Memory Capacity Exceeded
HCI_STATUS_CONNECT_TIMEOUT =0X08, //Connection Timeout
HCI_STATUS_CONNECT_LIMIT =0X09, //Connection Limit Exceeded
HCI_STATUS_SYN_CONNECT_LIMIT =0X0a, //Synchronous Connection Limit To A Device Exceeded
HCI_STATUS_ACL_CONNECT_EXISTS =0X0b, //ACL Connection Already Exists
HCI_STATUS_CMD_DISALLOW =0X0c, //Command Disallowed
HCI_STATUS_CONNECT_RJT_LIMIT_RESOURCE =0X0d, //Connection Rejected due to Limited Resources
HCI_STATUS_CONNECT_RJT_SEC_REASON =0X0e, //Connection Rejected Due To Security Reasons
HCI_STATUS_CONNECT_RJT_UNACCEPT_BD_ADDR =0X0f, //Connection Rejected due to Unacceptable BD_ADDR
HCI_STATUS_CONNECT_ACCEPT_TIMEOUT =0X10, //Connection Accept Timeout Exceeded
HCI_STATUS_UNSUPPORT_FEATURE_PARA_VALUE =0X11, //Unsupported Feature or Parameter Value
HCI_STATUS_INVALID_HCI_CMD_PARA_VALUE =0X12, //Invalid HCI Command Parameters
HCI_STATUS_REMOTE_USER_TERMINATE_CONNECT =0X13, //Remote User Terminated Connection
HCI_STATUS_REMOTE_DEV_TERMINATE_LOW_RESOURCE =0X14, //Remote Device Terminated Connection due to Low Resources
HCI_STATUS_REMOTE_DEV_TERMINATE_CONNECT_POWER_OFF =0X15, //Remote Device Terminated Connection due to Power Off
HCI_STATUS_CONNECT_TERMINATE_LOCAL_HOST =0X16, //Connection Terminated By Local Host
HCI_STATUS_REPEATE_ATTEMPT =0X17, //Repeated Attempts
HCI_STATUS_PAIR_NOT_ALLOW =0X18, //Pairing Not Allowed
HCI_STATUS_UNKNOW_LMP_PDU =0X19, //Unknown LMP PDU
HCI_STATUS_UNSUPPORT_REMOTE_LMP_FEATURE =0X1a, //Unsupported Remote Feature / Unsupported LMP Feature
HCI_STATUS_SOC_OFFSET_REJECT =0X1b, //SCO Offset Rejected
HCI_STATUS_SOC_INTERVAL_REJECT =0X1c, //SCO Interval Rejected
HCI_STATUS_SOC_AIR_MODE_REJECT =0X1d,//SCO Air Mode Rejected
HCI_STATUS_INVALID_LMP_PARA =0X1e, //Invalid LMP Parameters
HCI_STATUS_UNSPECIFIC_ERROR =0X1f, //Unspecified Error
HCI_STATUS_UNSUPPORT_LMP_PARA_VALUE =0X20, //Unsupported LMP Parameter Value
HCI_STATUS_ROLE_CHANGE_NOT_ALLOW =0X21, //Role Change Not Allowed
HCI_STATUS_LMP_RESPONSE_TIMEOUT =0X22, //LMP Response Timeout
HCI_STATUS_LMP_ERROR_TRANSACTION_COLLISION =0X23, //LMP Error Transaction Collision
HCI_STATUS_LMP_PDU_NOT_ALLOW =0X24, //LMP PDU Not Allowed
HCI_STATUS_ENCRYPTION_MODE_NOT_ALLOW =0X25, //Encryption Mode Not Acceptable
HCI_STATUS_LINK_KEY_CAN_NOT_CHANGE =0X26, //Link Key Can Not be Changed
HCI_STATUS_REQUEST_QOS_NOT_SUPPORT =0X27, //Requested QoS Not Supported
HCI_STATUS_INSTANT_PASSED =0X28, //Instant Passed
HCI_STATUS_PAIRING_UNIT_KEY_NOT_SUPPORT =0X29, //Pairing With Unit Key Not Supported
HCI_STATUS_DIFFERENT_TRANSACTION_COLLISION =0X2a, //Different Transaction Collision
HCI_STATUS_RESERVE_1 =0X2b, //Reserved
HCI_STATUS_QOS_UNACCEPT_PARA =0X2c, //QoS Unacceptable Parameter
HCI_STATUS_QOS_REJECT =0X2d, //QoS Rejected
HCI_STATUS_CHNL_CLASSIFICATION_NOT_SUPPORT =0X2e, //Channel Classification Not Supported
HCI_STATUS_INSUFFICIENT_SECURITY =0X2f, //Insufficient Security
HCI_STATUS_PARA_OUT_OF_RANGE =0x30, //Parameter Out Of Mandatory Range
HCI_STATUS_RESERVE_2 =0X31, //Reserved
HCI_STATUS_ROLE_SWITCH_PENDING =0X32, //Role Switch Pending
HCI_STATUS_RESERVE_3 =0X33, //Reserved
HCI_STATUS_RESERVE_SOLT_VIOLATION =0X34, //Reserved Slot Violation
HCI_STATUS_ROLE_SWITCH_FAIL =0X35, //Role Switch Failed
HCI_STATUS_EXTEND_INQUIRY_RSP_TOO_LARGE =0X36, //Extended Inquiry Response Too Large
HCI_STATUS_SEC_SIMPLE_PAIRING_NOT_SUPPORT =0X37, //Secure Simple Pairing Not Supported By Host.
HCI_STATUS_HOST_BUSY_PAIRING =0X38, //Host Busy - Pairing
HCI_STATUS_CONNECT_REJ_NOT_SUIT_CHNL_FOUND =0X39, //Connection Rejected due to No Suitable Channel Found
HCI_STATUS_CONTROLLER_BUSY =0X3a //CONTROLLER BUSY
}RTW_HCI_STATUS;
#define HCI_EVENT_COMMAND_COMPLETE 0x0e
#define OGF_EXTENSION 0X3f
typedef enum HCI_EXTENSION_COMMANDS{
HCI_SET_ACL_LINK_DATA_FLOW_MODE =0x0010,
HCI_SET_ACL_LINK_STATUS =0x0020,
HCI_SET_SCO_LINK_STATUS =0x0030,
HCI_SET_RSSI_VALUE =0x0040,
HCI_SET_CURRENT_BLUETOOTH_STATUS =0x0041,
//The following is for RTK8723
HCI_EXTENSION_VERSION_NOTIFY =0x0100,
HCI_LINK_STATUS_NOTIFY =0x0101,
HCI_BT_OPERATION_NOTIFY =0x0102,
HCI_ENABLE_WIFI_SCAN_NOTIFY =0x0103,
HCI_QUERY_RF_STATUS =0x0104,
HCI_BT_ABNORMAL_NOTIFY =0x0105,
HCI_BT_INFO_NOTIFY =0x0106,
HCI_BT_COEX_NOTIFY =0x0107,
HCI_BT_PATCH_VERSION_NOTIFY =0x0108,
HCI_BT_AFH_MAP_NOTIFY =0x0109,
HCI_BT_REGISTER_VALUE_NOTIFY =0x010a,
//The following is for IVT
HCI_WIFI_CURRENT_CHANNEL =0x0300,
HCI_WIFI_CURRENT_BANDWIDTH =0x0301,
HCI_WIFI_CONNECTION_STATUS =0x0302
}RTW_HCI_EXT_CMD;
#define HCI_EVENT_EXTENSION_RTK 0xfe
typedef enum HCI_EXTENSION_EVENT_RTK{
HCI_EVENT_EXT_WIFI_SCAN_NOTIFY =0x01,
HCI_EVENT_EXT_WIFI_RF_STATUS_NOTIFY =0x02,
HCI_EVENT_EXT_BT_INFO_CONTROL =0x03,
HCI_EVENT_EXT_BT_COEX_CONTROL =0x04
}RTW_HCI_EXT_EVENT;
typedef enum _BT_TRAFFIC_MODE{
BT_MOTOR_EXT_BE = 0x00, //Best Effort. Default. for HCRP, PAN, SDP, RFCOMM-based profiles like FTP,OPP, SPP, DUN, etc.
BT_MOTOR_EXT_GUL = 0x01, //Guaranteed Latency. This type of traffic is used e.g. for HID and AVRCP.
BT_MOTOR_EXT_GUB = 0X02, //Guaranteed Bandwidth.
BT_MOTOR_EXT_GULB = 0X03 //Guaranteed Latency and Bandwidth. for A2DP and VDP.
} BT_TRAFFIC_MODE;
typedef enum _BT_TRAFFIC_MODE_PROFILE{
BT_PROFILE_NONE,
BT_PROFILE_A2DP,
BT_PROFILE_PAN ,
BT_PROFILE_HID,
BT_PROFILE_SCO
} BT_TRAFFIC_MODE_PROFILE;
typedef enum _HCI_EXT_BT_OPERATION {
HCI_BT_OP_NONE = 0x0,
HCI_BT_OP_INQUIRY_START = 0x1,
HCI_BT_OP_INQUIRY_FINISH = 0x2,
HCI_BT_OP_PAGING_START = 0x3,
HCI_BT_OP_PAGING_SUCCESS = 0x4,
HCI_BT_OP_PAGING_UNSUCCESS = 0x5,
HCI_BT_OP_PAIRING_START = 0x6,
HCI_BT_OP_PAIRING_FINISH = 0x7,
HCI_BT_OP_BT_DEV_ENABLE = 0x8,
HCI_BT_OP_BT_DEV_DISABLE = 0x9,
HCI_BT_OP_MAX
} HCI_EXT_BT_OPERATION, *PHCI_EXT_BT_OPERATION;
typedef struct _BT_MGNT{
BOOLEAN bBTConnectInProgress;
BOOLEAN bLogLinkInProgress;
BOOLEAN bPhyLinkInProgress;
BOOLEAN bPhyLinkInProgressStartLL;
u1Byte BtCurrentPhyLinkhandle;
u2Byte BtCurrentLogLinkhandle;
u1Byte CurrentConnectEntryNum;
u1Byte DisconnectEntryNum;
u1Byte CurrentBTConnectionCnt;
BT_CONNECT_TYPE BTCurrentConnectType;
BT_CONNECT_TYPE BTReceiveConnectPkt;
u1Byte BTAuthCount;
u1Byte BTAsocCount;
BOOLEAN bStartSendSupervisionPkt;
BOOLEAN BtOperationOn;
BOOLEAN BTNeedAMPStatusChg;
BOOLEAN JoinerNeedSendAuth;
HCI_PHY_LINK_BSS_INFO bssDesc;
HCI_EXT_CONFIG ExtConfig;
BOOLEAN bNeedNotifyAMPNoCap;
BOOLEAN bCreateSpportQos;
BOOLEAN bSupportProfile;
u1Byte BTChannel;
BOOLEAN CheckChnlIsSuit;
BOOLEAN bBtScan;
BOOLEAN btLogoTest;
BOOLEAN bRfStatusNotified;
BOOLEAN bBtRsvedPageDownload;
}BT_MGNT, *PBT_MGNT;
struct bt_coex_info {
/* For Kernel Socket */
struct socket *udpsock;
struct sockaddr_in wifi_sockaddr; /*wifi socket*/
struct sockaddr_in bt_sockaddr;/* BT socket */
struct sock *sk_store;/*back up socket for UDP RX int*/
/* store which socket is OK */
u8 sock_open;
u8 BT_attend;
u8 is_exist; /* socket exist */
BT_MGNT BtMgnt;
struct workqueue_struct *btcoex_wq;
struct delayed_work recvmsg_work;
};
#endif //CONFIG_BT_COEXIST_SOCKET_TRX
#define PACKET_NORMAL 0
#define PACKET_DHCP 1
#define PACKET_ARP 2
#define PACKET_EAPOL 3
void rtw_btcoex_Initialize(PADAPTER);
void rtw_btcoex_PowerOnSetting(PADAPTER padapter);
void rtw_btcoex_PreLoadFirmware(PADAPTER padapter);
void rtw_btcoex_HAL_Initialize(PADAPTER padapter, u8 bWifiOnly);
void rtw_btcoex_IpsNotify(PADAPTER, u8 type);
void rtw_btcoex_LpsNotify(PADAPTER, u8 type);
void rtw_btcoex_ScanNotify(PADAPTER, u8 type);
void rtw_btcoex_ConnectNotify(PADAPTER, u8 action);
void rtw_btcoex_MediaStatusNotify(PADAPTER, u8 mediaStatus);
void rtw_btcoex_SpecialPacketNotify(PADAPTER, u8 pktType);
void rtw_btcoex_IQKNotify(PADAPTER padapter, u8 state);
void rtw_btcoex_BtInfoNotify(PADAPTER, u8 length, u8 *tmpBuf);
void rtw_btcoex_BtMpRptNotify(PADAPTER, u8 length, u8 *tmpBuf);
void rtw_btcoex_SuspendNotify(PADAPTER, u8 state);
void rtw_btcoex_HaltNotify(PADAPTER);
void rtw_btcoex_ScoreBoardStatusNotify(PADAPTER, u8 length, u8 *tmpBuf);
void rtw_btcoex_SwitchBtTRxMask(PADAPTER);
void rtw_btcoex_Switch(PADAPTER, u8 enable);
u8 rtw_btcoex_IsBtDisabled(PADAPTER);
void rtw_btcoex_Handler(PADAPTER);
s32 rtw_btcoex_IsBTCoexRejectAMPDU(PADAPTER padapter);
s32 rtw_btcoex_IsBTCoexCtrlAMPDUSize(PADAPTER);
u32 rtw_btcoex_GetAMPDUSize(PADAPTER);
void rtw_btcoex_SetManualControl(PADAPTER, u8 bmanual);
u8 rtw_btcoex_1Ant(PADAPTER);
u8 rtw_btcoex_IsBtControlLps(PADAPTER);
u8 rtw_btcoex_IsLpsOn(PADAPTER);
u8 rtw_btcoex_RpwmVal(PADAPTER);
u8 rtw_btcoex_LpsVal(PADAPTER);
void rtw_btcoex_SetBTCoexist(PADAPTER, u8 bBtExist);
void rtw_btcoex_SetChipType(PADAPTER, u8 chipType);
void rtw_btcoex_SetPGAntNum(PADAPTER, u8 antNum);
u8 rtw_btcoex_GetPGAntNum(PADAPTER);
void rtw_btcoex_SetSingleAntPath(PADAPTER padapter, u8 singleAntPath);
u32 rtw_btcoex_GetRaMask(PADAPTER);
void rtw_btcoex_RecordPwrMode(PADAPTER, u8 *pCmdBuf, u8 cmdLen);
void rtw_btcoex_DisplayBtCoexInfo(PADAPTER, u8 *pbuf, u32 bufsize);
void rtw_btcoex_SetDBG(PADAPTER, u32 *pDbgModule);
u32 rtw_btcoex_GetDBG(PADAPTER, u8 *pStrBuf, u32 bufSize);
u8 rtw_btcoex_IncreaseScanDeviceNum(PADAPTER);
u8 rtw_btcoex_IsBtLinkExist(PADAPTER);
void rtw_btcoex_BTOffOnNotify(PADAPTER padapter, u8 bBTON);
#ifdef CONFIG_BT_COEXIST_SOCKET_TRX
void rtw_btcoex_SetBtPatchVersion(PADAPTER padapter,u16 btHciVer, u16 btPatchVer);
void rtw_btcoex_SetHciVersion(PADAPTER padapter, u16 hciVersion);
void rtw_btcoex_StackUpdateProfileInfo(void);
void rtw_btcoex_init_socket(_adapter *padapter);
void rtw_btcoex_close_socket(_adapter *padapter);
void rtw_btcoex_dump_tx_msg(u8 *tx_msg, u8 len, u8 *msg_name);
u8 rtw_btcoex_sendmsgbysocket(_adapter *padapter, u8 *msg, u8 msg_size, bool force);
u8 rtw_btcoex_create_kernel_socket(_adapter *padapter);
void rtw_btcoex_close_kernel_socket(_adapter *padapter);
void rtw_btcoex_recvmsgbysocket(void *data);
u16 rtw_btcoex_parse_recv_data(u8 *msg, u8 msg_size);
u8 rtw_btcoex_btinfo_cmd(PADAPTER padapter, u8 *pbuf, u16 length);
void rtw_btcoex_parse_hci_cmd(_adapter *padapter, u8 *cmd, u16 len);
void rtw_btcoex_SendEventExtBtCoexControl(PADAPTER Adapter, u8 bNeedDbgRsp, u8 dataLen, void *pData);
void rtw_btcoex_SendEventExtBtInfoControl(PADAPTER Adapter, u8 dataLen, void *pData);
void rtw_btcoex_SendScanNotify(PADAPTER padapter, u8 scanType);
#define BT_SendEventExtBtCoexControl(Adapter, bNeedDbgRsp, dataLen, pData) rtw_btcoex_SendEventExtBtCoexControl(Adapter, bNeedDbgRsp, dataLen, pData)
#define BT_SendEventExtBtInfoControl(Adapter, dataLen, pData) rtw_btcoex_SendEventExtBtInfoControl(Adapter, dataLen, pData)
#endif //CONFIG_BT_COEXIST_SOCKET_TRX
u16 rtw_btcoex_btreg_read(PADAPTER padapter, u8 type, u16 addr, u32 *data);
u16 rtw_btcoex_btreg_write(PADAPTER padapter, u8 type, u16 addr, u16 val);
// ==================================================
// Below Functions are called by BT-Coex
// ==================================================
void rtw_btcoex_rx_ampdu_apply(PADAPTER);
void rtw_btcoex_LPS_Enter(PADAPTER);
void rtw_btcoex_LPS_Leave(PADAPTER);
#endif // __RTW_BTCOEX_H__