rtl8723cs/include/hal_com_led.h
2017-01-30 21:28:09 +01:00

399 lines
13 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HAL_COMMON_LED_H_
#define __HAL_COMMON_LED_H_
#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
//================================================================================
// LED Behavior Constant.
//================================================================================
// Default LED behavior.
//
#define LED_BLINK_NORMAL_INTERVAL 100
#define LED_BLINK_SLOWLY_INTERVAL 200
#define LED_BLINK_LONG_INTERVAL 400
#define LED_INITIAL_INTERVAL 1800
// LED Customerization
//NETTRONIX
#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
//PORNET
#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
#define LED_BLINK_NORMAL_INTERVAL_PORNET 100
#define LED_BLINK_FAST_INTERVAL_BITLAND 30
//AzWave.
#define LED_CM2_BLINK_ON_INTERVAL 250
#define LED_CM2_BLINK_OFF_INTERVAL 4750
#define LED_CM8_BLINK_OFF_INTERVAL 3750 //for QMI
//RunTop
#define LED_RunTop_BLINK_INTERVAL 300
//ALPHA
#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
#define LED_BLINK_NO_LINK_INTERVAL_ALPHA_500MS 500 //add by ylb 20121012 for customer led for alpha
#define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500
#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150
#define LED_BLINK_FASTER_INTERVAL_ALPHA 50
#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
// 111122 by hpfan: Customized for Xavi
#define LED_CM11_BLINK_INTERVAL 300
#define LED_CM11_LINK_ON_INTERVEL 3000
//Netgear
#define LED_BLINK_LINK_INTERVAL_NETGEAR 500
#define LED_BLINK_LINK_SLOWLY_INTERVAL_NETGEAR 1000
#define LED_WPS_BLINK_OFF_INTERVAL_NETGEAR 100
#define LED_WPS_BLINK_ON_INTERVAL_NETGEAR 500
//Belkin AC950
#define LED_BLINK_LINK_INTERVAL_ON_BELKIN 200
#define LED_BLINK_LINK_INTERVAL_OFF_BELKIN 100
#define LED_BLINK_ERROR_INTERVAL_BELKIN 100
//by chiyokolin for Azurewave
#define LED_CM12_BLINK_INTERVAL_5Mbps 160
#define LED_CM12_BLINK_INTERVAL_10Mbps 80
#define LED_CM12_BLINK_INTERVAL_20Mbps 50
#define LED_CM12_BLINK_INTERVAL_40Mbps 40
#define LED_CM12_BLINK_INTERVAL_80Mbps 30
#define LED_CM12_BLINK_INTERVAL_MAXMbps 25
//Dlink
#define LED_BLINK_NO_LINK_INTERVAL 1000
#define LED_BLINK_LINK_IDEL_INTERVAL 100
#define LED_BLINK_SCAN_ON_INTERVAL 30
#define LED_BLINK_SCAN_OFF_INTERVAL 300
#define LED_WPS_BLINK_ON_INTERVAL_DLINK 30
#define LED_WPS_BLINK_OFF_INTERVAL_DLINK 300
#define LED_WPS_BLINK_LINKED_ON_INTERVAL_DLINK 5000
//================================================================================
// LED object.
//================================================================================
typedef enum _LED_CTL_MODE{
LED_CTL_POWER_ON = 1,
LED_CTL_LINK = 2,
LED_CTL_NO_LINK = 3,
LED_CTL_TX = 4,
LED_CTL_RX = 5,
LED_CTL_SITE_SURVEY = 6,
LED_CTL_POWER_OFF = 7,
LED_CTL_START_TO_LINK = 8,
LED_CTL_START_WPS = 9,
LED_CTL_STOP_WPS = 10,
LED_CTL_START_WPS_BOTTON = 11, //added for runtop
LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA
LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
LED_CTL_CONNECTION_NO_TRANSFER = 14,
}LED_CTL_MODE;
typedef enum _LED_STATE{
LED_UNKNOWN = 0,
RTW_LED_ON = 1,
RTW_LED_OFF = 2,
LED_BLINK_NORMAL = 3,
LED_BLINK_SLOWLY = 4,
LED_BLINK_POWER_ON = 5,
LED_BLINK_SCAN = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
LED_BLINK_NO_LINK = 7, // LED is blinking during no link state.
LED_BLINK_StartToBlink = 8, // Customzied for Sercomm Printer Server case
LED_BLINK_TXRX = 9,
LED_BLINK_WPS = 10, // LED is blinkg during WPS communication
LED_BLINK_WPS_STOP = 11, //for ALPHA
LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN
LED_BLINK_RUNTOP = 13, // Customized for RunTop
LED_BLINK_CAMEO = 14,
LED_BLINK_XAVI = 15,
LED_BLINK_ALWAYS_ON = 16,
LED_BLINK_LINK_IN_PROCESS = 17, //Customized for Belkin AC950
LED_BLINK_AUTH_ERROR = 18, //Customized for Belkin AC950
LED_BLINK_Azurewave_5Mbps = 19,
LED_BLINK_Azurewave_10Mbps = 20,
LED_BLINK_Azurewave_20Mbps = 21,
LED_BLINK_Azurewave_40Mbps = 22,
LED_BLINK_Azurewave_80Mbps = 23,
LED_BLINK_Azurewave_MAXMbps = 24,
LED_BLINK_LINK_IDEL = 25,
LED_BLINK_WPS_LINKED = 26,
}LED_STATE;
typedef enum _LED_PIN{
LED_PIN_GPIO0,
LED_PIN_LED0,
LED_PIN_LED1,
LED_PIN_LED2
}LED_PIN;
//================================================================================
// PCIE LED Definition.
//================================================================================
#ifdef CONFIG_PCI_HCI
typedef enum _LED_STRATEGY_PCIE{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
SW_LED_MODE1, // SW control for PCI Express
SW_LED_MODE2, // SW control for Cameo.
SW_LED_MODE3, // SW contorl for RunTop.
SW_LED_MODE4, // SW control for Netcore
SW_LED_MODE5, //added by vivi, for led new mode, DLINK
SW_LED_MODE6, //added by vivi, for led new mode, PRONET
SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
SW_LED_MODE8, //added by chiyokolin, for QMI
SW_LED_MODE9, //added by chiyokolin, for BITLAND-LENOVO, PCI Express Minicard Spec Rev.1.1
SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS
SW_LED_MODE11, //added by hpfan, for Xavi
SW_LED_MODE12, //added by chiyokolin, for Azurewave
HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
}LED_STRATEGY_PCIE, *PLED_STRATEGY_PCIE;
typedef struct _LED_PCIE{
PADAPTER padapter;
LED_PIN LedPin; // Identify how to implement this SW led.
LED_STATE CurrLedState; // Current LED state.
BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
BOOLEAN bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
BOOLEAN bLedSlowBlinkInProgress;//added by vivi, for led new mode
u32 BlinkTimes; // Number of times to toggle led state for blinking.
LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
_timer BlinkTimer; // Timer object for led blinking.
} LED_PCIE, *PLED_PCIE;
typedef struct _LED_PCIE LED_DATA, *PLED_DATA;
typedef enum _LED_STRATEGY_PCIE LED_STRATEGY, *PLED_STRATEGY;
VOID
LedControlPCIE(
IN PADAPTER Adapter,
IN LED_CTL_MODE LedAction
);
VOID
gen_RefreshLedState(
IN PADAPTER Adapter);
//================================================================================
// USB LED Definition.
//================================================================================
#elif defined(CONFIG_USB_HCI)
#define IS_LED_WPS_BLINKING(_LED_USB) (((PLED_USB)_LED_USB)->CurrLedState==LED_BLINK_WPS \
|| ((PLED_USB)_LED_USB)->CurrLedState==LED_BLINK_WPS_STOP \
|| ((PLED_USB)_LED_USB)->bLedWPSBlinkInProgress)
#define IS_LED_BLINKING(_LED_USB) (((PLED_USB)_LED_USB)->bLedWPSBlinkInProgress \
||((PLED_USB)_LED_USB)->bLedScanBlinkInProgress)
typedef enum _LED_STRATEGY_USB{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
SW_LED_MODE4, //for Edimax / Belkin
SW_LED_MODE5, //for Sercomm / Belkin
SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
SW_LED_MODE7, //for Netgear special requirement
SW_LED_MODE8, //for LC
SW_LED_MODE9, //for Belkin AC950
SW_LED_MODE10, //for Netgear A6200V2
SW_LED_MODE11, //for Edimax / ASUS
SW_LED_MODE12, //for WNC/NEC
SW_LED_MODE13, //for Netgear A6100, 8811Au
SW_LED_MODE14, //for Buffalo, DNI, 8811Au
SW_LED_MODE15, //for DLINK, 8811Au/8812AU
HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
}LED_STRATEGY_USB, *PLED_STRATEGY_USB;
typedef struct _LED_USB{
PADAPTER padapter;
LED_PIN LedPin; // Identify how to implement this SW led.
LED_STATE CurrLedState; // Current LED state.
BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
BOOLEAN bSWLedCtrl;
BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
// ALPHA, added by chiyoko, 20090106
BOOLEAN bLedNoLinkBlinkInProgress;
BOOLEAN bLedLinkBlinkInProgress;
BOOLEAN bLedStartToLinkBlinkInProgress;
BOOLEAN bLedScanBlinkInProgress;
BOOLEAN bLedWPSBlinkInProgress;
u32 BlinkTimes; // Number of times to toggle led state for blinking.
u8 BlinkCounter; //Added for turn off overlap led after blinking a while, by page, 20120821
LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
_timer BlinkTimer; // Timer object for led blinking.
_workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.'
ATOMIC_T bCancelWorkItem; //check if WorkItem is cancelled
} LED_USB, *PLED_USB;
typedef struct _LED_USB LED_DATA, *PLED_DATA;
typedef enum _LED_STRATEGY_USB LED_STRATEGY, *PLED_STRATEGY;
VOID
LedControlUSB(
IN PADAPTER Adapter,
IN LED_CTL_MODE LedAction
);
//================================================================================
// SDIO LED Definition.
//================================================================================
#elif defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
#define IS_LED_WPS_BLINKING(_LED_SDIO) (((PLED_SDIO)_LED_SDIO)->CurrLedState==LED_BLINK_WPS \
|| ((PLED_SDIO)_LED_SDIO)->CurrLedState==LED_BLINK_WPS_STOP \
|| ((PLED_SDIO)_LED_SDIO)->bLedWPSBlinkInProgress)
#define IS_LED_BLINKING(_LED_SDIO) (((PLED_SDIO)_LED_SDIO)->bLedWPSBlinkInProgress \
||((PLED_SDIO)_LED_SDIO)->bLedScanBlinkInProgress)
typedef enum _LED_STRATEGY_SDIO{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
SW_LED_MODE4, //for Edimax / Belkin
SW_LED_MODE5, //for Sercomm / Belkin
SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
}LED_STRATEGY_SDIO, *PLED_STRATEGY_SDIO;
typedef struct _LED_SDIO{
PADAPTER padapter;
LED_PIN LedPin; // Identify how to implement this SW led.
LED_STATE CurrLedState; // Current LED state.
BOOLEAN bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
BOOLEAN bSWLedCtrl;
BOOLEAN bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
// ALPHA, added by chiyoko, 20090106
BOOLEAN bLedNoLinkBlinkInProgress;
BOOLEAN bLedLinkBlinkInProgress;
BOOLEAN bLedStartToLinkBlinkInProgress;
BOOLEAN bLedScanBlinkInProgress;
BOOLEAN bLedWPSBlinkInProgress;
u32 BlinkTimes; // Number of times to toggle led state for blinking.
LED_STATE BlinkingLedState; // Next state for blinking, either LED_ON or LED_OFF are.
_timer BlinkTimer; // Timer object for led blinking.
_workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
} LED_SDIO, *PLED_SDIO;
typedef struct _LED_SDIO LED_DATA, *PLED_DATA;
typedef enum _LED_STRATEGY_SDIO LED_STRATEGY, *PLED_STRATEGY;
VOID
LedControlSDIO(
IN PADAPTER Adapter,
IN LED_CTL_MODE LedAction
);
#endif
struct led_priv{
/* add for led controll */
LED_DATA SwLed0;
LED_DATA SwLed1;
LED_DATA SwLed2;
LED_STRATEGY LedStrategy;
u8 bRegUseLed;
void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
void (*SwLedOn)(_adapter *padapter, PLED_DATA pLed);
void (*SwLedOff)(_adapter *padapter, PLED_DATA pLed);
/* add for led controll */
};
#ifdef CONFIG_SW_LED
#define rtw_led_control(adapter, LedAction) \
do { \
if((adapter)->ledpriv.LedControlHandler) \
(adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
} while(0)
#else //CONFIG_SW_LED
#define rtw_led_control(adapter, LedAction)
#endif //CONFIG_SW_LED
#define SwLedOn(adapter, pLed) \
do { \
if((adapter)->ledpriv.SwLedOn) \
(adapter)->ledpriv.SwLedOn((adapter), (pLed)); \
} while(0)
#define SwLedOff(adapter, pLed) \
do { \
if((adapter)->ledpriv.SwLedOff) \
(adapter)->ledpriv.SwLedOff((adapter), (pLed)); \
} while(0)
void BlinkTimerCallback(void *data);
void BlinkWorkItemCallback(_workitem *work);
void ResetLedStatus(PLED_DATA pLed);
void
InitLed(
_adapter *padapter,
PLED_DATA pLed,
LED_PIN LedPin
);
void
DeInitLed(
PLED_DATA pLed
);
//hal...
extern void BlinkHandler(PLED_DATA pLed);
#endif //__RTW_LED_H_