1107 lines
40 KiB
C
1107 lines
40 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
*
|
|
******************************************************************************/
|
|
#ifndef __INC_HAL8188EPHYREG_H__
|
|
#define __INC_HAL8188EPHYREG_H__
|
|
/*--------------------------Define Parameters-------------------------------*/
|
|
//
|
|
// BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF
|
|
// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
|
|
// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
|
|
// 3. RF register 0x00-2E
|
|
// 4. Bit Mask for BB/RF register
|
|
// 5. Other defintion for BB/RF R/W
|
|
//
|
|
|
|
|
|
//
|
|
// 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
|
|
// 1. Page1(0x100)
|
|
//
|
|
#define rPMAC_Reset 0x100
|
|
#define rPMAC_TxStart 0x104
|
|
#define rPMAC_TxLegacySIG 0x108
|
|
#define rPMAC_TxHTSIG1 0x10c
|
|
#define rPMAC_TxHTSIG2 0x110
|
|
#define rPMAC_PHYDebug 0x114
|
|
#define rPMAC_TxPacketNum 0x118
|
|
#define rPMAC_TxIdle 0x11c
|
|
#define rPMAC_TxMACHeader0 0x120
|
|
#define rPMAC_TxMACHeader1 0x124
|
|
#define rPMAC_TxMACHeader2 0x128
|
|
#define rPMAC_TxMACHeader3 0x12c
|
|
#define rPMAC_TxMACHeader4 0x130
|
|
#define rPMAC_TxMACHeader5 0x134
|
|
#define rPMAC_TxDataType 0x138
|
|
#define rPMAC_TxRandomSeed 0x13c
|
|
#define rPMAC_CCKPLCPPreamble 0x140
|
|
#define rPMAC_CCKPLCPHeader 0x144
|
|
#define rPMAC_CCKCRC16 0x148
|
|
#define rPMAC_OFDMRxCRC32OK 0x170
|
|
#define rPMAC_OFDMRxCRC32Er 0x174
|
|
#define rPMAC_OFDMRxParityEr 0x178
|
|
#define rPMAC_OFDMRxCRC8Er 0x17c
|
|
#define rPMAC_CCKCRxRC16Er 0x180
|
|
#define rPMAC_CCKCRxRC32Er 0x184
|
|
#define rPMAC_CCKCRxRC32OK 0x188
|
|
#define rPMAC_TxStatus 0x18c
|
|
|
|
//
|
|
// 2. Page2(0x200)
|
|
//
|
|
// The following two definition are only used for USB interface.
|
|
#define RF_BB_CMD_ADDR 0x02c0 // RF/BB read/write command address.
|
|
#define RF_BB_CMD_DATA 0x02c4 // RF/BB read/write command data.
|
|
|
|
//
|
|
// 3. Page8(0x800)
|
|
//
|
|
#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC // RF BW Setting??
|
|
|
|
#define rFPGA0_TxInfo 0x804 // Status report??
|
|
#define rFPGA0_PSDFunction 0x808
|
|
|
|
#define rFPGA0_TxGainStage 0x80c // Set TX PWR init gain?
|
|
|
|
#define rFPGA0_RFTiming1 0x810 // Useless now
|
|
#define rFPGA0_RFTiming2 0x814
|
|
|
|
#define rFPGA0_XA_HSSIParameter1 0x820 // RF 3 wire register
|
|
#define rFPGA0_XA_HSSIParameter2 0x824
|
|
#define rFPGA0_XB_HSSIParameter1 0x828
|
|
#define rFPGA0_XB_HSSIParameter2 0x82c
|
|
|
|
#define rFPGA0_XA_LSSIParameter 0x840
|
|
#define rFPGA0_XB_LSSIParameter 0x844
|
|
|
|
#define rFPGA0_RFWakeUpParameter 0x850 // Useless now
|
|
#define rFPGA0_RFSleepUpParameter 0x854
|
|
|
|
#define rFPGA0_XAB_SwitchControl 0x858 // RF Channel switch
|
|
#define rFPGA0_XCD_SwitchControl 0x85c
|
|
|
|
#define rFPGA0_XA_RFInterfaceOE 0x860 // RF Channel switch
|
|
#define rFPGA0_XB_RFInterfaceOE 0x864
|
|
#define rFPGA0_XAB_RFInterfaceSW 0x870 // RF Interface Software Control
|
|
#define rFPGA0_XCD_RFInterfaceSW 0x874
|
|
|
|
#define rFPGA0_XAB_RFParameter 0x878 // RF Parameter
|
|
#define rFPGA0_XCD_RFParameter 0x87c
|
|
|
|
#define rFPGA0_AnalogParameter1 0x880 // Crystal cap setting RF-R/W protection for parameter4??
|
|
#define rFPGA0_AnalogParameter2 0x884
|
|
#define rFPGA0_AnalogParameter3 0x888
|
|
#define rFPGA0_AdDaClockEn 0x888 // enable ad/da clock1 for dual-phy
|
|
#define rFPGA0_AnalogParameter4 0x88c
|
|
|
|
#define rFPGA0_XA_LSSIReadBack 0x8a0 // Tranceiver LSSI Readback
|
|
#define rFPGA0_XB_LSSIReadBack 0x8a4
|
|
#define rFPGA0_XC_LSSIReadBack 0x8a8
|
|
#define rFPGA0_XD_LSSIReadBack 0x8ac
|
|
|
|
#define rFPGA0_PSDReport 0x8b4 // Useless now
|
|
#define TransceiverA_HSPI_Readback 0x8b8 // Transceiver A HSPI Readback
|
|
#define TransceiverB_HSPI_Readback 0x8bc // Transceiver B HSPI Readback
|
|
#define rFPGA0_XAB_RFInterfaceRB 0x8e0 // Useless now // RF Interface Readback Value
|
|
#define rFPGA0_XCD_RFInterfaceRB 0x8e4 // Useless now
|
|
|
|
//
|
|
// 4. Page9(0x900)
|
|
//
|
|
#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC // RF BW Setting??
|
|
|
|
#define rFPGA1_TxBlock 0x904 // Useless now
|
|
#define rFPGA1_DebugSelect 0x908 // Useless now
|
|
#define rFPGA1_TxInfo 0x90c // Useless now // Status report??
|
|
|
|
//
|
|
// 5. PageA(0xA00)
|
|
//
|
|
// Set Control channel to upper or lower. These settings are required only for 40MHz
|
|
#define rCCK0_System 0xa00
|
|
|
|
#define rCCK0_AFESetting 0xa04 // Disable init gain now // Select RX path by RSSI
|
|
#define rCCK0_CCA 0xa08 // Disable init gain now // Init gain
|
|
|
|
#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level // Antenna Diversity, RX AGC, LNA Threshold, RX LNA Threshold useless now. Not the same as 90 series
|
|
#define rCCK0_RxAGC2 0xa10 //AGC & DAGC
|
|
|
|
#define rCCK0_RxHP 0xa14
|
|
|
|
#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold
|
|
#define rCCK0_DSPParameter2 0xa1c //SQ threshold
|
|
|
|
#define rCCK0_TxFilter1 0xa20
|
|
#define rCCK0_TxFilter2 0xa24
|
|
#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3
|
|
#define rCCK0_FalseAlarmReport 0xa2c //0xa2d useless now 0xa30-a4f channel report
|
|
#define rCCK0_TRSSIReport 0xa50
|
|
#define rCCK0_RxReport 0xa54 //0xa57
|
|
#define rCCK0_FACounterLower 0xa5c //0xa5b
|
|
#define rCCK0_FACounterUpper 0xa58 //0xa5c
|
|
|
|
//
|
|
// PageB(0xB00)
|
|
//
|
|
#define rPdp_AntA 0xb00
|
|
#define rPdp_AntA_4 0xb04
|
|
#define rConfig_Pmpd_AntA 0xb28
|
|
#define rConfig_ram64x16 0xb2c
|
|
#define rConfig_AntA 0xb68
|
|
#define rConfig_AntB 0xb6c
|
|
#define rPdp_AntB 0xb70
|
|
#define rPdp_AntB_4 0xb74
|
|
#define rConfig_Pmpd_AntB 0xb98
|
|
#define rAPK 0xbd8
|
|
|
|
|
|
|
|
//
|
|
// 6. PageC(0xC00)
|
|
//
|
|
#define rOFDM0_LSTF 0xc00
|
|
|
|
#define rOFDM0_TRxPathEnable 0xc04
|
|
#define rOFDM0_TRMuxPar 0xc08
|
|
#define rOFDM0_TRSWIsolation 0xc0c
|
|
|
|
#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter
|
|
#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix
|
|
#define rOFDM0_XBRxAFE 0xc18
|
|
#define rOFDM0_XBRxIQImbalance 0xc1c
|
|
#define rOFDM0_XCRxAFE 0xc20
|
|
#define rOFDM0_XCRxIQImbalance 0xc24
|
|
#define rOFDM0_XDRxAFE 0xc28
|
|
#define rOFDM0_XDRxIQImbalance 0xc2c
|
|
|
|
#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD // DM tune init gain
|
|
#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync.
|
|
#define rOFDM0_RxDetector3 0xc38 //Frame Sync.
|
|
#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI
|
|
|
|
#define rOFDM0_RxDSP 0xc40 //Rx Sync Path
|
|
#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC
|
|
#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold
|
|
#define rOFDM0_ECCAThreshold 0xc4c // energy CCA
|
|
|
|
#define rOFDM0_XAAGCCore1 0xc50 // DIG
|
|
#define rOFDM0_XAAGCCore2 0xc54
|
|
#define rOFDM0_XBAGCCore1 0xc58
|
|
#define rOFDM0_XBAGCCore2 0xc5c
|
|
#define rOFDM0_XCAGCCore1 0xc60
|
|
#define rOFDM0_XCAGCCore2 0xc64
|
|
#define rOFDM0_XDAGCCore1 0xc68
|
|
#define rOFDM0_XDAGCCore2 0xc6c
|
|
|
|
#define rOFDM0_AGCParameter1 0xc70
|
|
#define rOFDM0_AGCParameter2 0xc74
|
|
#define rOFDM0_AGCRSSITable 0xc78
|
|
#define rOFDM0_HTSTFAGC 0xc7c
|
|
|
|
#define rOFDM0_XATxIQImbalance 0xc80 // TX PWR TRACK and DIG
|
|
#define rOFDM0_XATxAFE 0xc84
|
|
#define rOFDM0_XBTxIQImbalance 0xc88
|
|
#define rOFDM0_XBTxAFE 0xc8c
|
|
#define rOFDM0_XCTxIQImbalance 0xc90
|
|
#define rOFDM0_XCTxAFE 0xc94
|
|
#define rOFDM0_XDTxIQImbalance 0xc98
|
|
#define rOFDM0_XDTxAFE 0xc9c
|
|
|
|
#define rOFDM0_RxIQExtAnta 0xca0
|
|
#define rOFDM0_TxCoeff1 0xca4
|
|
#define rOFDM0_TxCoeff2 0xca8
|
|
#define rOFDM0_TxCoeff3 0xcac
|
|
#define rOFDM0_TxCoeff4 0xcb0
|
|
#define rOFDM0_TxCoeff5 0xcb4
|
|
#define rOFDM0_TxCoeff6 0xcb8
|
|
#define rOFDM0_RxHPParameter 0xce0
|
|
#define rOFDM0_TxPseudoNoiseWgt 0xce4
|
|
#define rOFDM0_FrameSync 0xcf0
|
|
#define rOFDM0_DFSReport 0xcf4
|
|
|
|
|
|
//
|
|
// 7. PageD(0xD00)
|
|
//
|
|
#define rOFDM1_LSTF 0xd00
|
|
#define rOFDM1_TRxPathEnable 0xd04
|
|
|
|
#define rOFDM1_CFO 0xd08 // No setting now
|
|
#define rOFDM1_CSI1 0xd10
|
|
#define rOFDM1_SBD 0xd14
|
|
#define rOFDM1_CSI2 0xd18
|
|
#define rOFDM1_CFOTracking 0xd2c
|
|
#define rOFDM1_TRxMesaure1 0xd34
|
|
#define rOFDM1_IntfDet 0xd3c
|
|
#define rOFDM1_csi_fix_mask1 0xd40
|
|
#define rOFDM1_csi_fix_mask2 0xd44
|
|
#define rOFDM1_PseudoNoiseStateAB 0xd50
|
|
#define rOFDM1_PseudoNoiseStateCD 0xd54
|
|
#define rOFDM1_RxPseudoNoiseWgt 0xd58
|
|
|
|
#define rOFDM_PHYCounter1 0xda0 //cca, parity fail
|
|
#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail
|
|
#define rOFDM_PHYCounter3 0xda8 //MCS not support
|
|
|
|
#define rOFDM_ShortCFOAB 0xdac // No setting now
|
|
#define rOFDM_ShortCFOCD 0xdb0
|
|
#define rOFDM_LongCFOAB 0xdb4
|
|
#define rOFDM_LongCFOCD 0xdb8
|
|
#define rOFDM_TailCFOAB 0xdbc
|
|
#define rOFDM_TailCFOCD 0xdc0
|
|
#define rOFDM_PWMeasure1 0xdc4
|
|
#define rOFDM_PWMeasure2 0xdc8
|
|
#define rOFDM_BWReport 0xdcc
|
|
#define rOFDM_AGCReport 0xdd0
|
|
#define rOFDM_RxSNR 0xdd4
|
|
#define rOFDM_RxEVMCSI 0xdd8
|
|
#define rOFDM_SIGReport 0xddc
|
|
|
|
|
|
//
|
|
// 8. PageE(0xE00)
|
|
//
|
|
#define rTxAGC_A_Rate18_06 0xe00
|
|
#define rTxAGC_A_Rate54_24 0xe04
|
|
#define rTxAGC_A_CCK1_Mcs32 0xe08
|
|
#define rTxAGC_A_Mcs03_Mcs00 0xe10
|
|
#define rTxAGC_A_Mcs07_Mcs04 0xe14
|
|
#define rTxAGC_A_Mcs11_Mcs08 0xe18
|
|
#define rTxAGC_A_Mcs15_Mcs12 0xe1c
|
|
|
|
#define rTxAGC_B_Rate18_06 0x830
|
|
#define rTxAGC_B_Rate54_24 0x834
|
|
#define rTxAGC_B_CCK1_55_Mcs32 0x838
|
|
#define rTxAGC_B_Mcs03_Mcs00 0x83c
|
|
#define rTxAGC_B_Mcs07_Mcs04 0x848
|
|
#define rTxAGC_B_Mcs11_Mcs08 0x84c
|
|
#define rTxAGC_B_Mcs15_Mcs12 0x868
|
|
#define rTxAGC_B_CCK11_A_CCK2_11 0x86c
|
|
|
|
#define rFPGA0_IQK 0xe28
|
|
#define rTx_IQK_Tone_A 0xe30
|
|
#define rRx_IQK_Tone_A 0xe34
|
|
#define rTx_IQK_PI_A 0xe38
|
|
#define rRx_IQK_PI_A 0xe3c
|
|
|
|
#define rTx_IQK 0xe40
|
|
#define rRx_IQK 0xe44
|
|
#define rIQK_AGC_Pts 0xe48
|
|
#define rIQK_AGC_Rsp 0xe4c
|
|
#define rTx_IQK_Tone_B 0xe50
|
|
#define rRx_IQK_Tone_B 0xe54
|
|
#define rTx_IQK_PI_B 0xe58
|
|
#define rRx_IQK_PI_B 0xe5c
|
|
#define rIQK_AGC_Cont 0xe60
|
|
|
|
#define rBlue_Tooth 0xe6c
|
|
#define rRx_Wait_CCA 0xe70
|
|
#define rTx_CCK_RFON 0xe74
|
|
#define rTx_CCK_BBON 0xe78
|
|
#define rTx_OFDM_RFON 0xe7c
|
|
#define rTx_OFDM_BBON 0xe80
|
|
#define rTx_To_Rx 0xe84
|
|
#define rTx_To_Tx 0xe88
|
|
#define rRx_CCK 0xe8c
|
|
|
|
#define rTx_Power_Before_IQK_A 0xe94
|
|
#define rTx_Power_After_IQK_A 0xe9c
|
|
|
|
#define rRx_Power_Before_IQK_A 0xea0
|
|
#define rRx_Power_Before_IQK_A_2 0xea4
|
|
#define rRx_Power_After_IQK_A 0xea8
|
|
#define rRx_Power_After_IQK_A_2 0xeac
|
|
|
|
#define rTx_Power_Before_IQK_B 0xeb4
|
|
#define rTx_Power_After_IQK_B 0xebc
|
|
|
|
#define rRx_Power_Before_IQK_B 0xec0
|
|
#define rRx_Power_Before_IQK_B_2 0xec4
|
|
#define rRx_Power_After_IQK_B 0xec8
|
|
#define rRx_Power_After_IQK_B_2 0xecc
|
|
|
|
#define rRx_OFDM 0xed0
|
|
#define rRx_Wait_RIFS 0xed4
|
|
#define rRx_TO_Rx 0xed8
|
|
#define rStandby 0xedc
|
|
#define rSleep 0xee0
|
|
#define rPMPD_ANAEN 0xeec
|
|
|
|
//
|
|
// 7. RF Register 0x00-0x2E (RF 8256)
|
|
// RF-0222D 0x00-3F
|
|
//
|
|
//Zebra1
|
|
#define rZebra1_HSSIEnable 0x0 // Useless now
|
|
#define rZebra1_TRxEnable1 0x1
|
|
#define rZebra1_TRxEnable2 0x2
|
|
#define rZebra1_AGC 0x4
|
|
#define rZebra1_ChargePump 0x5
|
|
#define rZebra1_Channel 0x7 // RF channel switch
|
|
|
|
//#endif
|
|
#define rZebra1_TxGain 0x8 // Useless now
|
|
#define rZebra1_TxLPF 0x9
|
|
#define rZebra1_RxLPF 0xb
|
|
#define rZebra1_RxHPFCorner 0xc
|
|
|
|
//Zebra4
|
|
#define rGlobalCtrl 0 // Useless now
|
|
#define rRTL8256_TxLPF 19
|
|
#define rRTL8256_RxLPF 11
|
|
|
|
//RTL8258
|
|
#define rRTL8258_TxLPF 0x11 // Useless now
|
|
#define rRTL8258_RxLPF 0x13
|
|
#define rRTL8258_RSSILPF 0xa
|
|
|
|
//
|
|
// RL6052 Register definition
|
|
//
|
|
#define RF_AC 0x00 //
|
|
|
|
#define RF_IQADJ_G1 0x01 //
|
|
#define RF_IQADJ_G2 0x02 //
|
|
|
|
#define RF_POW_TRSW 0x05 //
|
|
|
|
#define RF_GAIN_RX 0x06 //
|
|
#define RF_GAIN_TX 0x07 //
|
|
|
|
#define RF_TXM_IDAC 0x08 //
|
|
#define RF_IPA_G 0x09 //
|
|
#define RF_TXBIAS_G 0x0A
|
|
#define RF_TXPA_AG 0x0B
|
|
#define RF_IPA_A 0x0C //
|
|
#define RF_TXBIAS_A 0x0D
|
|
#define RF_BS_PA_APSET_G9_G11 0x0E
|
|
#define RF_BS_IQGEN 0x0F //
|
|
|
|
#define RF_MODE1 0x10 //
|
|
#define RF_MODE2 0x11 //
|
|
|
|
#define RF_RX_AGC_HP 0x12 //
|
|
#define RF_TX_AGC 0x13 //
|
|
#define RF_BIAS 0x14 //
|
|
#define RF_IPA 0x15 //
|
|
#define RF_TXBIAS 0x16
|
|
#define RF_POW_ABILITY 0x17 //
|
|
#define RF_CHNLBW 0x18 // RF channel and BW switch
|
|
#define RF_TOP 0x19 //
|
|
|
|
#define RF_RX_G1 0x1A //
|
|
#define RF_RX_G2 0x1B //
|
|
|
|
#define RF_RX_BB2 0x1C //
|
|
#define RF_RX_BB1 0x1D //
|
|
|
|
#define RF_RCK1 0x1E //
|
|
#define RF_RCK2 0x1F //
|
|
|
|
#define RF_TX_G1 0x20 //
|
|
#define RF_TX_G2 0x21 //
|
|
#define RF_TX_G3 0x22 //
|
|
|
|
#define RF_TX_BB1 0x23 //
|
|
|
|
#define RF_T_METER_88E 0x42 //
|
|
#define RF_T_METER 0x24 //
|
|
|
|
#define RF_SYN_G1 0x25 // RF TX Power control
|
|
#define RF_SYN_G2 0x26 // RF TX Power control
|
|
#define RF_SYN_G3 0x27 // RF TX Power control
|
|
#define RF_SYN_G4 0x28 // RF TX Power control
|
|
#define RF_SYN_G5 0x29 // RF TX Power control
|
|
#define RF_SYN_G6 0x2A // RF TX Power control
|
|
#define RF_SYN_G7 0x2B // RF TX Power control
|
|
#define RF_SYN_G8 0x2C // RF TX Power control
|
|
|
|
#define RF_RCK_OS 0x30 // RF TX PA control
|
|
#define RF_TXPA_G1 0x31 // RF TX PA control
|
|
#define RF_TXPA_G2 0x32 // RF TX PA control
|
|
#define RF_TXPA_G3 0x33 // RF TX PA control
|
|
#define RF_TX_BIAS_A 0x35
|
|
#define RF_TX_BIAS_D 0x36
|
|
#define RF_LOBF_9 0x38
|
|
#define RF_RXRF_A3 0x3C //
|
|
#define RF_TRSW 0x3F
|
|
|
|
#define RF_TXRF_A2 0x41
|
|
#define RF_TXPA_G4 0x46
|
|
#define RF_TXPA_A4 0x4B
|
|
#define RF_0x52 0x52
|
|
#define RF_WE_LUT 0xEF
|
|
|
|
|
|
//
|
|
//Bit Mask
|
|
//
|
|
// 1. Page1(0x100)
|
|
#define bBBResetB 0x100 // Useless now?
|
|
#define bGlobalResetB 0x200
|
|
#define bOFDMTxStart 0x4
|
|
#define bCCKTxStart 0x8
|
|
#define bCRC32Debug 0x100
|
|
#define bPMACLoopback 0x10
|
|
#define bTxLSIG 0xffffff
|
|
#define bOFDMTxRate 0xf
|
|
#define bOFDMTxReserved 0x10
|
|
#define bOFDMTxLength 0x1ffe0
|
|
#define bOFDMTxParity 0x20000
|
|
#define bTxHTSIG1 0xffffff
|
|
#define bTxHTMCSRate 0x7f
|
|
#define bTxHTBW 0x80
|
|
#define bTxHTLength 0xffff00
|
|
#define bTxHTSIG2 0xffffff
|
|
#define bTxHTSmoothing 0x1
|
|
#define bTxHTSounding 0x2
|
|
#define bTxHTReserved 0x4
|
|
#define bTxHTAggreation 0x8
|
|
#define bTxHTSTBC 0x30
|
|
#define bTxHTAdvanceCoding 0x40
|
|
#define bTxHTShortGI 0x80
|
|
#define bTxHTNumberHT_LTF 0x300
|
|
#define bTxHTCRC8 0x3fc00
|
|
#define bCounterReset 0x10000
|
|
#define bNumOfOFDMTx 0xffff
|
|
#define bNumOfCCKTx 0xffff0000
|
|
#define bTxIdleInterval 0xffff
|
|
#define bOFDMService 0xffff0000
|
|
#define bTxMACHeader 0xffffffff
|
|
#define bTxDataInit 0xff
|
|
#define bTxHTMode 0x100
|
|
#define bTxDataType 0x30000
|
|
#define bTxRandomSeed 0xffffffff
|
|
#define bCCKTxPreamble 0x1
|
|
#define bCCKTxSFD 0xffff0000
|
|
#define bCCKTxSIG 0xff
|
|
#define bCCKTxService 0xff00
|
|
#define bCCKLengthExt 0x8000
|
|
#define bCCKTxLength 0xffff0000
|
|
#define bCCKTxCRC16 0xffff
|
|
#define bCCKTxStatus 0x1
|
|
#define bOFDMTxStatus 0x2
|
|
|
|
#define IS_BB_REG_OFFSET_92S(_Offset) ((_Offset >= 0x800) && (_Offset <= 0xfff))
|
|
|
|
// 2. Page8(0x800)
|
|
#define bRFMOD 0x1 // Reg 0x800 rFPGA0_RFMOD
|
|
#define bJapanMode 0x2
|
|
#define bCCKTxSC 0x30
|
|
#define bCCKEn 0x1000000
|
|
#define bOFDMEn 0x2000000
|
|
|
|
#define bOFDMRxADCPhase 0x10000 // Useless now
|
|
#define bOFDMTxDACPhase 0x40000
|
|
#define bXATxAGC 0x3f
|
|
|
|
#define bAntennaSelect 0x0300
|
|
|
|
#define bXBTxAGC 0xf00 // Reg 80c rFPGA0_TxGainStage
|
|
#define bXCTxAGC 0xf000
|
|
#define bXDTxAGC 0xf0000
|
|
|
|
#define bPAStart 0xf0000000 // Useless now
|
|
#define bTRStart 0x00f00000
|
|
#define bRFStart 0x0000f000
|
|
#define bBBStart 0x000000f0
|
|
#define bBBCCKStart 0x0000000f
|
|
#define bPAEnd 0xf //Reg0x814
|
|
#define bTREnd 0x0f000000
|
|
#define bRFEnd 0x000f0000
|
|
#define bCCAMask 0x000000f0 //T2R
|
|
#define bR2RCCAMask 0x00000f00
|
|
#define bHSSI_R2TDelay 0xf8000000
|
|
#define bHSSI_T2RDelay 0xf80000
|
|
#define bContTxHSSI 0x400 //chane gain at continue Tx
|
|
#define bIGFromCCK 0x200
|
|
#define bAGCAddress 0x3f
|
|
#define bRxHPTx 0x7000
|
|
#define bRxHPT2R 0x38000
|
|
#define bRxHPCCKIni 0xc0000
|
|
#define bAGCTxCode 0xc00000
|
|
#define bAGCRxCode 0x300000
|
|
|
|
#define b3WireDataLength 0x800 // Reg 0x820~84f rFPGA0_XA_HSSIParameter1
|
|
#define b3WireAddressLength 0x400
|
|
|
|
#define b3WireRFPowerDown 0x1 // Useless now
|
|
//#define bHWSISelect 0x8
|
|
#define b5GPAPEPolarity 0x40000000
|
|
#define b2GPAPEPolarity 0x80000000
|
|
#define bRFSW_TxDefaultAnt 0x3
|
|
#define bRFSW_TxOptionAnt 0x30
|
|
#define bRFSW_RxDefaultAnt 0x300
|
|
#define bRFSW_RxOptionAnt 0x3000
|
|
#define bRFSI_3WireData 0x1
|
|
#define bRFSI_3WireClock 0x2
|
|
#define bRFSI_3WireLoad 0x4
|
|
#define bRFSI_3WireRW 0x8
|
|
#define bRFSI_3Wire 0xf
|
|
|
|
#define bRFSI_RFENV 0x10 // Reg 0x870 rFPGA0_XAB_RFInterfaceSW
|
|
|
|
#define bRFSI_TRSW 0x20 // Useless now
|
|
#define bRFSI_TRSWB 0x40
|
|
#define bRFSI_ANTSW 0x100
|
|
#define bRFSI_ANTSWB 0x200
|
|
#define bRFSI_PAPE 0x400
|
|
#define bRFSI_PAPE5G 0x800
|
|
#define bBandSelect 0x1
|
|
#define bHTSIG2_GI 0x80
|
|
#define bHTSIG2_Smoothing 0x01
|
|
#define bHTSIG2_Sounding 0x02
|
|
#define bHTSIG2_Aggreaton 0x08
|
|
#define bHTSIG2_STBC 0x30
|
|
#define bHTSIG2_AdvCoding 0x40
|
|
#define bHTSIG2_NumOfHTLTF 0x300
|
|
#define bHTSIG2_CRC8 0x3fc
|
|
#define bHTSIG1_MCS 0x7f
|
|
#define bHTSIG1_BandWidth 0x80
|
|
#define bHTSIG1_HTLength 0xffff
|
|
#define bLSIG_Rate 0xf
|
|
#define bLSIG_Reserved 0x10
|
|
#define bLSIG_Length 0x1fffe
|
|
#define bLSIG_Parity 0x20
|
|
#define bCCKRxPhase 0x4
|
|
|
|
#define bLSSIReadAddress 0x7f800000 // T65 RF
|
|
|
|
#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal
|
|
|
|
#define bLSSIReadBackData 0xfffff // T65 RF
|
|
|
|
#define bLSSIReadOKFlag 0x1000 // Useless now
|
|
#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz
|
|
#define bRegulator0Standby 0x1
|
|
#define bRegulatorPLLStandby 0x2
|
|
#define bRegulator1Standby 0x4
|
|
#define bPLLPowerUp 0x8
|
|
#define bDPLLPowerUp 0x10
|
|
#define bDA10PowerUp 0x20
|
|
#define bAD7PowerUp 0x200
|
|
#define bDA6PowerUp 0x2000
|
|
#define bXtalPowerUp 0x4000
|
|
#define b40MDClkPowerUP 0x8000
|
|
#define bDA6DebugMode 0x20000
|
|
#define bDA6Swing 0x380000
|
|
|
|
#define bADClkPhase 0x4000000 // Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ
|
|
|
|
#define b80MClkDelay 0x18000000 // Useless
|
|
#define bAFEWatchDogEnable 0x20000000
|
|
|
|
#define bXtalCap01 0xc0000000 // Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap
|
|
#define bXtalCap23 0x3
|
|
#define bXtalCap92x 0x0f000000
|
|
#define bXtalCap 0x0f000000
|
|
|
|
#define bIntDifClkEnable 0x400 // Useless
|
|
#define bExtSigClkEnable 0x800
|
|
#define bBandgapMbiasPowerUp 0x10000
|
|
#define bAD11SHGain 0xc0000
|
|
#define bAD11InputRange 0x700000
|
|
#define bAD11OPCurrent 0x3800000
|
|
#define bIPathLoopback 0x4000000
|
|
#define bQPathLoopback 0x8000000
|
|
#define bAFELoopback 0x10000000
|
|
#define bDA10Swing 0x7e0
|
|
#define bDA10Reverse 0x800
|
|
#define bDAClkSource 0x1000
|
|
#define bAD7InputRange 0x6000
|
|
#define bAD7Gain 0x38000
|
|
#define bAD7OutputCMMode 0x40000
|
|
#define bAD7InputCMMode 0x380000
|
|
#define bAD7Current 0xc00000
|
|
#define bRegulatorAdjust 0x7000000
|
|
#define bAD11PowerUpAtTx 0x1
|
|
#define bDA10PSAtTx 0x10
|
|
#define bAD11PowerUpAtRx 0x100
|
|
#define bDA10PSAtRx 0x1000
|
|
#define bCCKRxAGCFormat 0x200
|
|
#define bPSDFFTSamplepPoint 0xc000
|
|
#define bPSDAverageNum 0x3000
|
|
#define bIQPathControl 0xc00
|
|
#define bPSDFreq 0x3ff
|
|
#define bPSDAntennaPath 0x30
|
|
#define bPSDIQSwitch 0x40
|
|
#define bPSDRxTrigger 0x400000
|
|
#define bPSDTxTrigger 0x80000000
|
|
#define bPSDSineToneScale 0x7f000000
|
|
#define bPSDReport 0xffff
|
|
|
|
// 3. Page9(0x900)
|
|
#define bOFDMTxSC 0x30000000 // Useless
|
|
#define bCCKTxOn 0x1
|
|
#define bOFDMTxOn 0x2
|
|
#define bDebugPage 0xfff //reset debug page and also HWord, LWord
|
|
#define bDebugItem 0xff //reset debug page and LWord
|
|
#define bAntL 0x10
|
|
#define bAntNonHT 0x100
|
|
#define bAntHT1 0x1000
|
|
#define bAntHT2 0x10000
|
|
#define bAntHT1S1 0x100000
|
|
#define bAntNonHTS1 0x1000000
|
|
|
|
// 4. PageA(0xA00)
|
|
#define bCCKBBMode 0x3 // Useless
|
|
#define bCCKTxPowerSaving 0x80
|
|
#define bCCKRxPowerSaving 0x40
|
|
|
|
#define bCCKSideBand 0x10 // Reg 0xa00 rCCK0_System 20/40 switch
|
|
|
|
#define bCCKScramble 0x8 // Useless
|
|
#define bCCKAntDiversity 0x8000
|
|
#define bCCKCarrierRecovery 0x4000
|
|
#define bCCKTxRate 0x3000
|
|
#define bCCKDCCancel 0x0800
|
|
#define bCCKISICancel 0x0400
|
|
#define bCCKMatchFilter 0x0200
|
|
#define bCCKEqualizer 0x0100
|
|
#define bCCKPreambleDetect 0x800000
|
|
#define bCCKFastFalseCCA 0x400000
|
|
#define bCCKChEstStart 0x300000
|
|
#define bCCKCCACount 0x080000
|
|
#define bCCKcs_lim 0x070000
|
|
#define bCCKBistMode 0x80000000
|
|
#define bCCKCCAMask 0x40000000
|
|
#define bCCKTxDACPhase 0x4
|
|
#define bCCKRxADCPhase 0x20000000 //r_rx_clk
|
|
#define bCCKr_cp_mode0 0x0100
|
|
#define bCCKTxDCOffset 0xf0
|
|
#define bCCKRxDCOffset 0xf
|
|
#define bCCKCCAMode 0xc000
|
|
#define bCCKFalseCS_lim 0x3f00
|
|
#define bCCKCS_ratio 0xc00000
|
|
#define bCCKCorgBit_sel 0x300000
|
|
#define bCCKPD_lim 0x0f0000
|
|
#define bCCKNewCCA 0x80000000
|
|
#define bCCKRxHPofIG 0x8000
|
|
#define bCCKRxIG 0x7f00
|
|
#define bCCKLNAPolarity 0x800000
|
|
#define bCCKRx1stGain 0x7f0000
|
|
#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity
|
|
#define bCCKRxAGCSatLevel 0x1f000000
|
|
#define bCCKRxAGCSatCount 0xe0
|
|
#define bCCKRxRFSettle 0x1f //AGCsamp_dly
|
|
#define bCCKFixedRxAGC 0x8000
|
|
//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824
|
|
#define bCCKAntennaPolarity 0x2000
|
|
#define bCCKTxFilterType 0x0c00
|
|
#define bCCKRxAGCReportType 0x0300
|
|
#define bCCKRxDAGCEn 0x80000000
|
|
#define bCCKRxDAGCPeriod 0x20000000
|
|
#define bCCKRxDAGCSatLevel 0x1f000000
|
|
#define bCCKTimingRecovery 0x800000
|
|
#define bCCKTxC0 0x3f0000
|
|
#define bCCKTxC1 0x3f000000
|
|
#define bCCKTxC2 0x3f
|
|
#define bCCKTxC3 0x3f00
|
|
#define bCCKTxC4 0x3f0000
|
|
#define bCCKTxC5 0x3f000000
|
|
#define bCCKTxC6 0x3f
|
|
#define bCCKTxC7 0x3f00
|
|
#define bCCKDebugPort 0xff0000
|
|
#define bCCKDACDebug 0x0f000000
|
|
#define bCCKFalseAlarmEnable 0x8000
|
|
#define bCCKFalseAlarmRead 0x4000
|
|
#define bCCKTRSSI 0x7f
|
|
#define bCCKRxAGCReport 0xfe
|
|
#define bCCKRxReport_AntSel 0x80000000
|
|
#define bCCKRxReport_MFOff 0x40000000
|
|
#define bCCKRxRxReport_SQLoss 0x20000000
|
|
#define bCCKRxReport_Pktloss 0x10000000
|
|
#define bCCKRxReport_Lockedbit 0x08000000
|
|
#define bCCKRxReport_RateError 0x04000000
|
|
#define bCCKRxReport_RxRate 0x03000000
|
|
#define bCCKRxFACounterLower 0xff
|
|
#define bCCKRxFACounterUpper 0xff000000
|
|
#define bCCKRxHPAGCStart 0xe000
|
|
#define bCCKRxHPAGCFinal 0x1c00
|
|
#define bCCKRxFalseAlarmEnable 0x8000
|
|
#define bCCKFACounterFreeze 0x4000
|
|
#define bCCKTxPathSel 0x10000000
|
|
#define bCCKDefaultRxPath 0xc000000
|
|
#define bCCKOptionRxPath 0x3000000
|
|
|
|
// 5. PageC(0xC00)
|
|
#define bNumOfSTF 0x3 // Useless
|
|
#define bShift_L 0xc0
|
|
#define bGI_TH 0xc
|
|
#define bRxPathA 0x1
|
|
#define bRxPathB 0x2
|
|
#define bRxPathC 0x4
|
|
#define bRxPathD 0x8
|
|
#define bTxPathA 0x1
|
|
#define bTxPathB 0x2
|
|
#define bTxPathC 0x4
|
|
#define bTxPathD 0x8
|
|
#define bTRSSIFreq 0x200
|
|
#define bADCBackoff 0x3000
|
|
#define bDFIRBackoff 0xc000
|
|
#define bTRSSILatchPhase 0x10000
|
|
#define bRxIDCOffset 0xff
|
|
#define bRxQDCOffset 0xff00
|
|
#define bRxDFIRMode 0x1800000
|
|
#define bRxDCNFType 0xe000000
|
|
#define bRXIQImb_A 0x3ff
|
|
#define bRXIQImb_B 0xfc00
|
|
#define bRXIQImb_C 0x3f0000
|
|
#define bRXIQImb_D 0xffc00000
|
|
#define bDC_dc_Notch 0x60000
|
|
#define bRxNBINotch 0x1f000000
|
|
#define bPD_TH 0xf
|
|
#define bPD_TH_Opt2 0xc000
|
|
#define bPWED_TH 0x700
|
|
#define bIfMF_Win_L 0x800
|
|
#define bPD_Option 0x1000
|
|
#define bMF_Win_L 0xe000
|
|
#define bBW_Search_L 0x30000
|
|
#define bwin_enh_L 0xc0000
|
|
#define bBW_TH 0x700000
|
|
#define bED_TH2 0x3800000
|
|
#define bBW_option 0x4000000
|
|
#define bRatio_TH 0x18000000
|
|
#define bWindow_L 0xe0000000
|
|
#define bSBD_Option 0x1
|
|
#define bFrame_TH 0x1c
|
|
#define bFS_Option 0x60
|
|
#define bDC_Slope_check 0x80
|
|
#define bFGuard_Counter_DC_L 0xe00
|
|
#define bFrame_Weight_Short 0x7000
|
|
#define bSub_Tune 0xe00000
|
|
#define bFrame_DC_Length 0xe000000
|
|
#define bSBD_start_offset 0x30000000
|
|
#define bFrame_TH_2 0x7
|
|
#define bFrame_GI2_TH 0x38
|
|
#define bGI2_Sync_en 0x40
|
|
#define bSarch_Short_Early 0x300
|
|
#define bSarch_Short_Late 0xc00
|
|
#define bSarch_GI2_Late 0x70000
|
|
#define bCFOAntSum 0x1
|
|
#define bCFOAcc 0x2
|
|
#define bCFOStartOffset 0xc
|
|
#define bCFOLookBack 0x70
|
|
#define bCFOSumWeight 0x80
|
|
#define bDAGCEnable 0x10000
|
|
#define bTXIQImb_A 0x3ff
|
|
#define bTXIQImb_B 0xfc00
|
|
#define bTXIQImb_C 0x3f0000
|
|
#define bTXIQImb_D 0xffc00000
|
|
#define bTxIDCOffset 0xff
|
|
#define bTxQDCOffset 0xff00
|
|
#define bTxDFIRMode 0x10000
|
|
#define bTxPesudoNoiseOn 0x4000000
|
|
#define bTxPesudoNoise_A 0xff
|
|
#define bTxPesudoNoise_B 0xff00
|
|
#define bTxPesudoNoise_C 0xff0000
|
|
#define bTxPesudoNoise_D 0xff000000
|
|
#define bCCADropOption 0x20000
|
|
#define bCCADropThres 0xfff00000
|
|
#define bEDCCA_H 0xf
|
|
#define bEDCCA_L 0xf0
|
|
#define bLambda_ED 0x300
|
|
#define bRxInitialGain 0x7f
|
|
#define bRxAntDivEn 0x80
|
|
#define bRxAGCAddressForLNA 0x7f00
|
|
#define bRxHighPowerFlow 0x8000
|
|
#define bRxAGCFreezeThres 0xc0000
|
|
#define bRxFreezeStep_AGC1 0x300000
|
|
#define bRxFreezeStep_AGC2 0xc00000
|
|
#define bRxFreezeStep_AGC3 0x3000000
|
|
#define bRxFreezeStep_AGC0 0xc000000
|
|
#define bRxRssi_Cmp_En 0x10000000
|
|
#define bRxQuickAGCEn 0x20000000
|
|
#define bRxAGCFreezeThresMode 0x40000000
|
|
#define bRxOverFlowCheckType 0x80000000
|
|
#define bRxAGCShift 0x7f
|
|
#define bTRSW_Tri_Only 0x80
|
|
#define bPowerThres 0x300
|
|
#define bRxAGCEn 0x1
|
|
#define bRxAGCTogetherEn 0x2
|
|
#define bRxAGCMin 0x4
|
|
#define bRxHP_Ini 0x7
|
|
#define bRxHP_TRLNA 0x70
|
|
#define bRxHP_RSSI 0x700
|
|
#define bRxHP_BBP1 0x7000
|
|
#define bRxHP_BBP2 0x70000
|
|
#define bRxHP_BBP3 0x700000
|
|
#define bRSSI_H 0x7f0000 //the threshold for high power
|
|
#define bRSSI_Gen 0x7f000000 //the threshold for ant diversity
|
|
#define bRxSettle_TRSW 0x7
|
|
#define bRxSettle_LNA 0x38
|
|
#define bRxSettle_RSSI 0x1c0
|
|
#define bRxSettle_BBP 0xe00
|
|
#define bRxSettle_RxHP 0x7000
|
|
#define bRxSettle_AntSW_RSSI 0x38000
|
|
#define bRxSettle_AntSW 0xc0000
|
|
#define bRxProcessTime_DAGC 0x300000
|
|
#define bRxSettle_HSSI 0x400000
|
|
#define bRxProcessTime_BBPPW 0x800000
|
|
#define bRxAntennaPowerShift 0x3000000
|
|
#define bRSSITableSelect 0xc000000
|
|
#define bRxHP_Final 0x7000000
|
|
#define bRxHTSettle_BBP 0x7
|
|
#define bRxHTSettle_HSSI 0x8
|
|
#define bRxHTSettle_RxHP 0x70
|
|
#define bRxHTSettle_BBPPW 0x80
|
|
#define bRxHTSettle_Idle 0x300
|
|
#define bRxHTSettle_Reserved 0x1c00
|
|
#define bRxHTRxHPEn 0x8000
|
|
#define bRxHTAGCFreezeThres 0x30000
|
|
#define bRxHTAGCTogetherEn 0x40000
|
|
#define bRxHTAGCMin 0x80000
|
|
#define bRxHTAGCEn 0x100000
|
|
#define bRxHTDAGCEn 0x200000
|
|
#define bRxHTRxHP_BBP 0x1c00000
|
|
#define bRxHTRxHP_Final 0xe0000000
|
|
#define bRxPWRatioTH 0x3
|
|
#define bRxPWRatioEn 0x4
|
|
#define bRxMFHold 0x3800
|
|
#define bRxPD_Delay_TH1 0x38
|
|
#define bRxPD_Delay_TH2 0x1c0
|
|
#define bRxPD_DC_COUNT_MAX 0x600
|
|
//#define bRxMF_Hold 0x3800
|
|
#define bRxPD_Delay_TH 0x8000
|
|
#define bRxProcess_Delay 0xf0000
|
|
#define bRxSearchrange_GI2_Early 0x700000
|
|
#define bRxFrame_Guard_Counter_L 0x3800000
|
|
#define bRxSGI_Guard_L 0xc000000
|
|
#define bRxSGI_Search_L 0x30000000
|
|
#define bRxSGI_TH 0xc0000000
|
|
#define bDFSCnt0 0xff
|
|
#define bDFSCnt1 0xff00
|
|
#define bDFSFlag 0xf0000
|
|
#define bMFWeightSum 0x300000
|
|
#define bMinIdxTH 0x7f000000
|
|
#define bDAFormat 0x40000
|
|
#define bTxChEmuEnable 0x01000000
|
|
#define bTRSWIsolation_A 0x7f
|
|
#define bTRSWIsolation_B 0x7f00
|
|
#define bTRSWIsolation_C 0x7f0000
|
|
#define bTRSWIsolation_D 0x7f000000
|
|
#define bExtLNAGain 0x7c00
|
|
|
|
// 6. PageE(0xE00)
|
|
#define bSTBCEn 0x4 // Useless
|
|
#define bAntennaMapping 0x10
|
|
#define bNss 0x20
|
|
#define bCFOAntSumD 0x200
|
|
#define bPHYCounterReset 0x8000000
|
|
#define bCFOReportGet 0x4000000
|
|
#define bOFDMContinueTx 0x10000000
|
|
#define bOFDMSingleCarrier 0x20000000
|
|
#define bOFDMSingleTone 0x40000000
|
|
//#define bRxPath1 0x01
|
|
//#define bRxPath2 0x02
|
|
//#define bRxPath3 0x04
|
|
//#define bRxPath4 0x08
|
|
//#define bTxPath1 0x10
|
|
//#define bTxPath2 0x20
|
|
#define bHTDetect 0x100
|
|
#define bCFOEn 0x10000
|
|
#define bCFOValue 0xfff00000
|
|
#define bSigTone_Re 0x3f
|
|
#define bSigTone_Im 0x7f00
|
|
#define bCounter_CCA 0xffff
|
|
#define bCounter_ParityFail 0xffff0000
|
|
#define bCounter_RateIllegal 0xffff
|
|
#define bCounter_CRC8Fail 0xffff0000
|
|
#define bCounter_MCSNoSupport 0xffff
|
|
#define bCounter_FastSync 0xffff
|
|
#define bShortCFO 0xfff
|
|
#define bShortCFOTLength 12 //total
|
|
#define bShortCFOFLength 11 //fraction
|
|
#define bLongCFO 0x7ff
|
|
#define bLongCFOTLength 11
|
|
#define bLongCFOFLength 11
|
|
#define bTailCFO 0x1fff
|
|
#define bTailCFOTLength 13
|
|
#define bTailCFOFLength 12
|
|
#define bmax_en_pwdB 0xffff
|
|
#define bCC_power_dB 0xffff0000
|
|
#define bnoise_pwdB 0xffff
|
|
#define bPowerMeasTLength 10
|
|
#define bPowerMeasFLength 3
|
|
#define bRx_HT_BW 0x1
|
|
#define bRxSC 0x6
|
|
#define bRx_HT 0x8
|
|
#define bNB_intf_det_on 0x1
|
|
#define bIntf_win_len_cfg 0x30
|
|
#define bNB_Intf_TH_cfg 0x1c0
|
|
#define bRFGain 0x3f
|
|
#define bTableSel 0x40
|
|
#define bTRSW 0x80
|
|
#define bRxSNR_A 0xff
|
|
#define bRxSNR_B 0xff00
|
|
#define bRxSNR_C 0xff0000
|
|
#define bRxSNR_D 0xff000000
|
|
#define bSNREVMTLength 8
|
|
#define bSNREVMFLength 1
|
|
#define bCSI1st 0xff
|
|
#define bCSI2nd 0xff00
|
|
#define bRxEVM1st 0xff0000
|
|
#define bRxEVM2nd 0xff000000
|
|
#define bSIGEVM 0xff
|
|
#define bPWDB 0xff00
|
|
#define bSGIEN 0x10000
|
|
|
|
#define bSFactorQAM1 0xf // Useless
|
|
#define bSFactorQAM2 0xf0
|
|
#define bSFactorQAM3 0xf00
|
|
#define bSFactorQAM4 0xf000
|
|
#define bSFactorQAM5 0xf0000
|
|
#define bSFactorQAM6 0xf0000
|
|
#define bSFactorQAM7 0xf00000
|
|
#define bSFactorQAM8 0xf000000
|
|
#define bSFactorQAM9 0xf0000000
|
|
#define bCSIScheme 0x100000
|
|
|
|
#define bNoiseLvlTopSet 0x3 // Useless
|
|
#define bChSmooth 0x4
|
|
#define bChSmoothCfg1 0x38
|
|
#define bChSmoothCfg2 0x1c0
|
|
#define bChSmoothCfg3 0xe00
|
|
#define bChSmoothCfg4 0x7000
|
|
#define bMRCMode 0x800000
|
|
#define bTHEVMCfg 0x7000000
|
|
|
|
#define bLoopFitType 0x1 // Useless
|
|
#define bUpdCFO 0x40
|
|
#define bUpdCFOOffData 0x80
|
|
#define bAdvUpdCFO 0x100
|
|
#define bAdvTimeCtrl 0x800
|
|
#define bUpdClko 0x1000
|
|
#define bFC 0x6000
|
|
#define bTrackingMode 0x8000
|
|
#define bPhCmpEnable 0x10000
|
|
#define bUpdClkoLTF 0x20000
|
|
#define bComChCFO 0x40000
|
|
#define bCSIEstiMode 0x80000
|
|
#define bAdvUpdEqz 0x100000
|
|
#define bUChCfg 0x7000000
|
|
#define bUpdEqz 0x8000000
|
|
|
|
//Rx Pseduo noise
|
|
#define bRxPesudoNoiseOn 0x20000000 // Useless
|
|
#define bRxPesudoNoise_A 0xff
|
|
#define bRxPesudoNoise_B 0xff00
|
|
#define bRxPesudoNoise_C 0xff0000
|
|
#define bRxPesudoNoise_D 0xff000000
|
|
#define bPesudoNoiseState_A 0xffff
|
|
#define bPesudoNoiseState_B 0xffff0000
|
|
#define bPesudoNoiseState_C 0xffff
|
|
#define bPesudoNoiseState_D 0xffff0000
|
|
|
|
//7. RF Register
|
|
//Zebra1
|
|
#define bZebra1_HSSIEnable 0x8 // Useless
|
|
#define bZebra1_TRxControl 0xc00
|
|
#define bZebra1_TRxGainSetting 0x07f
|
|
#define bZebra1_RxCorner 0xc00
|
|
#define bZebra1_TxChargePump 0x38
|
|
#define bZebra1_RxChargePump 0x7
|
|
#define bZebra1_ChannelNum 0xf80
|
|
#define bZebra1_TxLPFBW 0x400
|
|
#define bZebra1_RxLPFBW 0x600
|
|
|
|
//Zebra4
|
|
#define bRTL8256RegModeCtrl1 0x100 // Useless
|
|
#define bRTL8256RegModeCtrl0 0x40
|
|
#define bRTL8256_TxLPFBW 0x18
|
|
#define bRTL8256_RxLPFBW 0x600
|
|
|
|
//RTL8258
|
|
#define bRTL8258_TxLPFBW 0xc // Useless
|
|
#define bRTL8258_RxLPFBW 0xc00
|
|
#define bRTL8258_RSSILPFBW 0xc0
|
|
|
|
|
|
//
|
|
// Other Definition
|
|
//
|
|
|
|
//byte endable for sb_write
|
|
#define bByte0 0x1 // Useless
|
|
#define bByte1 0x2
|
|
#define bByte2 0x4
|
|
#define bByte3 0x8
|
|
#define bWord0 0x3
|
|
#define bWord1 0xc
|
|
#define bDWord 0xf
|
|
|
|
//for PutRegsetting & GetRegSetting BitMask
|
|
#define bMaskByte0 0xff // Reg 0xc50 rOFDM0_XAAGCCore~0xC6f
|
|
#define bMaskByte1 0xff00
|
|
#define bMaskByte2 0xff0000
|
|
#define bMaskByte3 0xff000000
|
|
#define bMaskHWord 0xffff0000
|
|
#define bMaskLWord 0x0000ffff
|
|
#define bMaskDWord 0xffffffff
|
|
#define bMaskH3Bytes 0xffffff00
|
|
#define bMask12Bits 0xfff
|
|
#define bMaskH4Bits 0xf0000000
|
|
#define bMaskOFDM_D 0xffc00000
|
|
#define bMaskCCK 0x3f3f3f3f
|
|
|
|
|
|
|
|
#define bEnable 0x1 // Useless
|
|
#define bDisable 0x0
|
|
|
|
#define LeftAntenna 0x0 // Useless
|
|
#define RightAntenna 0x1
|
|
|
|
#define tCheckTxStatus 500 //500ms // Useless
|
|
#define tUpdateRxCounter 100 //100ms
|
|
|
|
#define rateCCK 0 // Useless
|
|
#define rateOFDM 1
|
|
#define rateHT 2
|
|
|
|
//define Register-End
|
|
#define bPMAC_End 0x1ff // Useless
|
|
#define bFPGAPHY0_End 0x8ff
|
|
#define bFPGAPHY1_End 0x9ff
|
|
#define bCCKPHY0_End 0xaff
|
|
#define bOFDMPHY0_End 0xcff
|
|
#define bOFDMPHY1_End 0xdff
|
|
|
|
//define max debug item in each debug page
|
|
//#define bMaxItem_FPGA_PHY0 0x9
|
|
//#define bMaxItem_FPGA_PHY1 0x3
|
|
//#define bMaxItem_PHY_11B 0x16
|
|
//#define bMaxItem_OFDM_PHY0 0x29
|
|
//#define bMaxItem_OFDM_PHY1 0x0
|
|
|
|
#define bPMACControl 0x0 // Useless
|
|
#define bWMACControl 0x1
|
|
#define bWNICControl 0x2
|
|
|
|
#define PathA 0x0 // Useless
|
|
#define PathB 0x1
|
|
#define PathC 0x2
|
|
#define PathD 0x3
|
|
|
|
/*--------------------------Define Parameters-------------------------------*/
|
|
|
|
|
|
#endif
|
|
|