1801 lines
65 KiB
C
1801 lines
65 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
*
|
|
******************************************************************************/
|
|
#define _HAL_MP_C_
|
|
#ifdef CONFIG_MP_INCLUDED
|
|
|
|
#ifdef CONFIG_RTL8188E
|
|
#include <rtl8188e_hal.h>
|
|
#endif
|
|
#ifdef CONFIG_RTL8723B
|
|
#include <rtl8723b_hal.h>
|
|
#endif
|
|
#ifdef CONFIG_RTL8192E
|
|
#include <rtl8192e_hal.h>
|
|
#endif
|
|
#ifdef CONFIG_RTL8814A
|
|
#include <rtl8814a_hal.h>
|
|
#endif
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
|
|
#include <rtl8812a_hal.h>
|
|
#endif
|
|
#ifdef CONFIG_RTL8703B
|
|
#include <rtl8703b_hal.h>
|
|
#endif
|
|
#ifdef CONFIG_RTL8188F
|
|
#include <rtl8188f_hal.h>
|
|
#endif
|
|
|
|
|
|
u8 MgntQuery_NssTxRate(u16 Rate)
|
|
{
|
|
u8 NssNum = RF_TX_NUM_NONIMPLEMENT;
|
|
|
|
if ((Rate >= MGN_MCS8 && Rate <= MGN_MCS15) ||
|
|
(Rate >= MGN_VHT2SS_MCS0 && Rate <= MGN_VHT2SS_MCS9))
|
|
NssNum = RF_2TX;
|
|
else if ((Rate >= MGN_MCS16 && Rate <= MGN_MCS23) ||
|
|
(Rate >= MGN_VHT3SS_MCS0 && Rate <= MGN_VHT3SS_MCS9))
|
|
NssNum = RF_3TX;
|
|
else if ((Rate >= MGN_MCS24 && Rate <= MGN_MCS31) ||
|
|
(Rate >= MGN_VHT4SS_MCS0 && Rate <= MGN_VHT4SS_MCS9))
|
|
NssNum = RF_4TX;
|
|
else
|
|
NssNum = RF_1TX;
|
|
|
|
return NssNum;
|
|
}
|
|
|
|
void hal_mpt_SwitchRfSetting(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
u8 ChannelToSw = pMptCtx->MptChannelToSw;
|
|
ULONG ulRateIdx = pMptCtx->MptRateIndex;
|
|
ULONG ulbandwidth = pMptCtx->MptBandWidth;
|
|
|
|
/* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis.*/
|
|
if (IS_HARDWARE_TYPE_8188ES(pAdapter) && (1 <= ChannelToSw && ChannelToSw <= 11) &&
|
|
(ulRateIdx == MPT_RATE_MCS0 || ulRateIdx == MPT_RATE_1M || ulRateIdx == MPT_RATE_6M)) {
|
|
pMptCtx->backup0x52_RF_A = (u1Byte)PHY_QueryRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0);
|
|
pMptCtx->backup0x52_RF_B = (u1Byte)PHY_QueryRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0);
|
|
|
|
if ((PlatformEFIORead4Byte(pAdapter, 0xF4)&BIT29) == BIT29) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, 0xB);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, 0xB);
|
|
} else {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, 0xD);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, 0xD);
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8188EE(pAdapter)) { /* <20140903, VincentL> Asked by RF Eason and Edlu*/
|
|
|
|
if (ChannelToSw == 3 && ulbandwidth == MPT_BW_40MHZ) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, 0xB); /*RF 0x52 = 0x0007E4BD*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, 0xB); /*RF 0x52 = 0x0007E4BD*/
|
|
} else {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, 0x9); /*RF 0x52 = 0x0007E49D*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, 0x9); /*RF 0x52 = 0x0007E49D*/
|
|
}
|
|
|
|
} else if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, pMptCtx->backup0x52_RF_A);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, pMptCtx->backup0x52_RF_B);
|
|
}
|
|
}
|
|
|
|
s32 hal_mpt_SetPowerTracking(PADAPTER padapter, u8 enable)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
|
|
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
|
|
|
|
|
|
if (!netif_running(padapter->pnetdev)) {
|
|
RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n"));
|
|
return _FAIL;
|
|
}
|
|
|
|
if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
|
|
RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n"));
|
|
return _FAIL;
|
|
}
|
|
if (enable)
|
|
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = _TRUE;
|
|
else
|
|
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = _FALSE;
|
|
|
|
return _SUCCESS;
|
|
}
|
|
|
|
void hal_mpt_GetPowerTracking(PADAPTER padapter, u8 *enable)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
|
|
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
|
|
|
|
|
|
*enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl;
|
|
}
|
|
|
|
|
|
void hal_mpt_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14)
|
|
{
|
|
u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0;
|
|
u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12;
|
|
u8 i;
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
|
|
|
|
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.MptCtx);
|
|
u1Byte u1Channel = pHalData->CurrentChannel;
|
|
ULONG ulRateIdx = pMptCtx->MptRateIndex;
|
|
u1Byte DataRate = 0xFF;
|
|
|
|
DataRate = MptToMgntRate(ulRateIdx);
|
|
|
|
if (u1Channel == 14 && IS_CCK_RATE(DataRate))
|
|
pHalData->bCCKinCH14 = TRUE;
|
|
else
|
|
pHalData->bCCKinCH14 = FALSE;
|
|
|
|
if (IS_HARDWARE_TYPE_8703B(Adapter)) {
|
|
if ((u1Channel == 14) && IS_CCK_RATE(DataRate)) {
|
|
/* Channel 14 in CCK, need to set 0xA26~0xA29 to 0 for 8703B */
|
|
PHY_SetBBReg(Adapter, rCCK0_TxFilter2, bMaskHWord, 0);
|
|
PHY_SetBBReg(Adapter, rCCK0_DebugPort, bMaskLWord, 0);
|
|
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("MPT_CCKTxPowerAdjust 8703B CCK in Channel %u\n", u1Channel));
|
|
} else {
|
|
/* Normal setting for 8703B, just recover to the default setting. */
|
|
/* This hardcore values reference from the parameter which BB team gave. */
|
|
for (i = 0 ; i < 2 ; ++i)
|
|
PHY_SetBBReg(Adapter, pHalData->RegForRecover[i].offset, bMaskDWord, pHalData->RegForRecover[i].value);
|
|
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("MPT_CCKTxPowerAdjust 8703B in Channel %u restore to default setting\n", u1Channel));
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8188F(Adapter)) {
|
|
/* No difference between CCK in CH14 and others, no need to change TX filter */
|
|
} else {
|
|
|
|
/* get current cck swing value and check 0xa22 & 0xa23 later to match the table.*/
|
|
CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);
|
|
|
|
if (!pHalData->bCCKinCH14) {
|
|
/* Readback the current bb cck swing value and compare with the table to */
|
|
/* get the current swing index */
|
|
for (i = 0; i < CCK_TABLE_SIZE; i++) {
|
|
if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) &&
|
|
(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1])) {
|
|
CCKSwingIndex = i;
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("Ch1~13, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
|
|
(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*Write 0xa22 0xa23*/
|
|
TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] +
|
|
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8);
|
|
|
|
|
|
/*Write 0xa24 ~ 0xa27*/
|
|
TempVal2 = 0;
|
|
TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] +
|
|
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) +
|
|
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16) +
|
|
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24);
|
|
|
|
/*Write 0xa28 0xa29*/
|
|
TempVal3 = 0;
|
|
TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] +
|
|
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8);
|
|
} else {
|
|
for (i = 0; i < CCK_TABLE_SIZE; i++) {
|
|
if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) &&
|
|
(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1])) {
|
|
CCKSwingIndex = i;
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("Ch14, Current reg0x%x = 0x%lx, CCKSwingIndex=0x%x\n",
|
|
(rCCK0_TxFilter1+2), CurrCCKSwingVal, CCKSwingIndex));
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*Write 0xa22 0xa23*/
|
|
TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] +
|
|
(CCKSwingTable_Ch14[CCKSwingIndex][1]<<8);
|
|
|
|
/*Write 0xa24 ~ 0xa27*/
|
|
TempVal2 = 0;
|
|
TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] +
|
|
(CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) +
|
|
(CCKSwingTable_Ch14[CCKSwingIndex][4]<<16) +
|
|
(CCKSwingTable_Ch14[CCKSwingIndex][5]<<24);
|
|
|
|
/*Write 0xa28 0xa29*/
|
|
TempVal3 = 0;
|
|
TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] +
|
|
(CCKSwingTable_Ch14[CCKSwingIndex][7]<<8);
|
|
}
|
|
|
|
write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
|
|
write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
|
|
write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
void hal_mpt_SetChannel(PADAPTER pAdapter)
|
|
{
|
|
u8 eRFPath;
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
|
|
struct mp_priv *pmp = &pAdapter->mppriv;
|
|
u8 channel = pmp->channel;
|
|
u8 bandwidth = pmp->bandwidth;
|
|
u8 rate = pmp->rateidx;
|
|
|
|
hal_mpt_SwitchRfSetting(pAdapter);
|
|
|
|
SelectChannel(pAdapter, channel);
|
|
|
|
pHalData->bSwChnl = _TRUE;
|
|
pHalData->bSetChnlBW = _TRUE;
|
|
rtw_hal_set_chnl_bw(pAdapter, channel, bandwidth, 0, 0);
|
|
|
|
hal_mpt_CCKTxPowerAdjust(pAdapter, pHalData->bCCKinCH14);
|
|
|
|
}
|
|
|
|
/*
|
|
* Notice
|
|
* Switch bandwitdth may change center frequency(channel)
|
|
*/
|
|
void hal_mpt_SetBandwidth(PADAPTER pAdapter)
|
|
{
|
|
struct mp_priv *pmp = &pAdapter->mppriv;
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
|
|
u8 channel = pmp->channel;
|
|
u8 bandwidth = pmp->bandwidth;
|
|
|
|
SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset);
|
|
pHalData->bSwChnl = _TRUE;
|
|
pHalData->bSetChnlBW = _TRUE;
|
|
rtw_hal_set_chnl_bw(pAdapter, channel, bandwidth, 0, 0);
|
|
|
|
hal_mpt_SwitchRfSetting(pAdapter);
|
|
}
|
|
|
|
void mpt_SetTxPower_Old(PADAPTER pAdapter, MPT_TXPWR_DEF Rate, u8 *pTxPower)
|
|
{
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("===>mpt_SetTxPower_Old(): Case = %d\n", Rate));
|
|
switch (Rate) {
|
|
case MPT_CCK:
|
|
{
|
|
u4Byte TxAGC = 0, pwr = 0;
|
|
u1Byte rf;
|
|
|
|
pwr = pTxPower[ODM_RF_PATH_A];
|
|
if (pwr < 0x3f) {
|
|
TxAGC = (pwr<<16)|(pwr<<8)|(pwr);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, pTxPower[ODM_RF_PATH_A]);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, TxAGC);
|
|
}
|
|
pwr = pTxPower[ODM_RF_PATH_B];
|
|
if (pwr < 0x3f) {
|
|
TxAGC = (pwr<<16)|(pwr<<8)|(pwr);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, pTxPower[ODM_RF_PATH_B]);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, TxAGC);
|
|
}
|
|
|
|
} break;
|
|
|
|
case MPT_OFDM_AND_HT:
|
|
{
|
|
u4Byte TxAGC = 0;
|
|
u1Byte pwr = 0, rf;
|
|
|
|
pwr = pTxPower[0];
|
|
if (pwr < 0x3f) {
|
|
TxAGC |= ((pwr<<24)|(pwr<<16)|(pwr<<8)|pwr);
|
|
DBG_871X("HT Tx-rf(A) Power = 0x%x\n", TxAGC);
|
|
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);
|
|
}
|
|
TxAGC = 0;
|
|
pwr = pTxPower[1];
|
|
if (pwr < 0x3f) {
|
|
TxAGC |= ((pwr<<24)|(pwr<<16)|(pwr<<8)|pwr);
|
|
DBG_871X("HT Tx-rf(B) Power = 0x%x\n", TxAGC);
|
|
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
|
|
PHY_SetBBReg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);
|
|
}
|
|
} break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
DBG_871X("<===mpt_SetTxPower_Old()\n");
|
|
}
|
|
|
|
|
|
|
|
void
|
|
mpt_SetTxPower(
|
|
PADAPTER pAdapter,
|
|
MPT_TXPWR_DEF Rate,
|
|
pu1Byte pTxPower
|
|
)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
|
|
u1Byte path = 0 , i = 0, MaxRate = MGN_6M;
|
|
u1Byte StartPath = ODM_RF_PATH_A, EndPath = ODM_RF_PATH_B;
|
|
|
|
if (IS_HARDWARE_TYPE_8814A(pAdapter))
|
|
EndPath = ODM_RF_PATH_D;
|
|
|
|
switch (Rate) {
|
|
case MPT_CCK:
|
|
{
|
|
u1Byte rate[] = {MGN_1M, MGN_2M, MGN_5_5M, MGN_11M};
|
|
|
|
for (path = StartPath; path <= EndPath; path++)
|
|
for (i = 0; i < sizeof(rate); ++i)
|
|
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
|
|
}
|
|
break;
|
|
|
|
case MPT_OFDM:
|
|
{
|
|
u1Byte rate[] = {
|
|
MGN_6M, MGN_9M, MGN_12M, MGN_18M,
|
|
MGN_24M, MGN_36M, MGN_48M, MGN_54M,
|
|
};
|
|
|
|
for (path = StartPath; path <= EndPath; path++)
|
|
for (i = 0; i < sizeof(rate); ++i)
|
|
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
|
|
} break;
|
|
|
|
case MPT_HT:
|
|
{
|
|
u1Byte rate[] = {
|
|
MGN_MCS0, MGN_MCS1, MGN_MCS2, MGN_MCS3, MGN_MCS4,
|
|
MGN_MCS5, MGN_MCS6, MGN_MCS7, MGN_MCS8, MGN_MCS9,
|
|
MGN_MCS10, MGN_MCS11, MGN_MCS12, MGN_MCS13, MGN_MCS14,
|
|
MGN_MCS15, MGN_MCS16, MGN_MCS17, MGN_MCS18, MGN_MCS19,
|
|
MGN_MCS20, MGN_MCS21, MGN_MCS22, MGN_MCS23, MGN_MCS24,
|
|
MGN_MCS25, MGN_MCS26, MGN_MCS27, MGN_MCS28, MGN_MCS29,
|
|
MGN_MCS30, MGN_MCS31,
|
|
};
|
|
if (pHalData->rf_type == RF_3T3R)
|
|
MaxRate = MGN_MCS23;
|
|
else if (pHalData->rf_type == RF_2T2R)
|
|
MaxRate = MGN_MCS15;
|
|
else
|
|
MaxRate = MGN_MCS7;
|
|
|
|
for (path = StartPath; path <= EndPath; path++) {
|
|
for (i = 0; i < sizeof(rate); ++i) {
|
|
if (rate[i] > MaxRate)
|
|
break;
|
|
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
|
|
}
|
|
}
|
|
} break;
|
|
|
|
case MPT_VHT:
|
|
{
|
|
u1Byte rate[] = {
|
|
MGN_VHT1SS_MCS0, MGN_VHT1SS_MCS1, MGN_VHT1SS_MCS2, MGN_VHT1SS_MCS3, MGN_VHT1SS_MCS4,
|
|
MGN_VHT1SS_MCS5, MGN_VHT1SS_MCS6, MGN_VHT1SS_MCS7, MGN_VHT1SS_MCS8, MGN_VHT1SS_MCS9,
|
|
MGN_VHT2SS_MCS0, MGN_VHT2SS_MCS1, MGN_VHT2SS_MCS2, MGN_VHT2SS_MCS3, MGN_VHT2SS_MCS4,
|
|
MGN_VHT2SS_MCS5, MGN_VHT2SS_MCS6, MGN_VHT2SS_MCS7, MGN_VHT2SS_MCS8, MGN_VHT2SS_MCS9,
|
|
MGN_VHT3SS_MCS0, MGN_VHT3SS_MCS1, MGN_VHT3SS_MCS2, MGN_VHT3SS_MCS3, MGN_VHT3SS_MCS4,
|
|
MGN_VHT3SS_MCS5, MGN_VHT3SS_MCS6, MGN_VHT3SS_MCS7, MGN_VHT3SS_MCS8, MGN_VHT3SS_MCS9,
|
|
MGN_VHT4SS_MCS0, MGN_VHT4SS_MCS1, MGN_VHT4SS_MCS2, MGN_VHT4SS_MCS3, MGN_VHT4SS_MCS4,
|
|
MGN_VHT4SS_MCS5, MGN_VHT4SS_MCS6, MGN_VHT4SS_MCS7, MGN_VHT4SS_MCS8, MGN_VHT4SS_MCS9,
|
|
};
|
|
|
|
if (pHalData->rf_type == RF_3T3R)
|
|
MaxRate = MGN_VHT3SS_MCS9;
|
|
else if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_2T4R)
|
|
MaxRate = MGN_VHT2SS_MCS9;
|
|
else
|
|
MaxRate = MGN_VHT1SS_MCS9;
|
|
|
|
for (path = StartPath; path <= EndPath; path++) {
|
|
for (i = 0; i < sizeof(rate); ++i) {
|
|
if (rate[i] > MaxRate)
|
|
break;
|
|
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
|
|
}
|
|
}
|
|
} break;
|
|
|
|
default:
|
|
DBG_871X("<===mpt_SetTxPower: Illegal channel!!\n");
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
void hal_mpt_SetTxPower(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
PDM_ODM_T pDM_Odm = &pHalData->odmpriv;
|
|
|
|
if (pHalData->rf_chip < RF_TYPE_MAX) {
|
|
if (IS_HARDWARE_TYPE_8188E(pAdapter) ||
|
|
IS_HARDWARE_TYPE_8723B(pAdapter) ||
|
|
IS_HARDWARE_TYPE_8192E(pAdapter) ||
|
|
IS_HARDWARE_TYPE_8703B(pAdapter) ||
|
|
IS_HARDWARE_TYPE_8188F(pAdapter)) {
|
|
u8 path = (pHalData->AntennaTxPath == ANTENNA_A) ? (ODM_RF_PATH_A) : (ODM_RF_PATH_B);
|
|
|
|
DBG_8192C("===> MPT_ProSetTxPower: Old\n");
|
|
|
|
RT_TRACE(_module_mp_, DBG_LOUD, ("===> MPT_ProSetTxPower[Old]:\n"));
|
|
mpt_SetTxPower_Old(pAdapter, MPT_CCK, pMptCtx->TxPwrLevel);
|
|
mpt_SetTxPower_Old(pAdapter, MPT_OFDM_AND_HT, pMptCtx->TxPwrLevel);
|
|
|
|
} else {
|
|
DBG_871X("===> MPT_ProSetTxPower: Jaguar\n");
|
|
mpt_SetTxPower(pAdapter, MPT_CCK, pMptCtx->TxPwrLevel);
|
|
mpt_SetTxPower(pAdapter, MPT_OFDM, pMptCtx->TxPwrLevel);
|
|
mpt_SetTxPower(pAdapter, MPT_HT, pMptCtx->TxPwrLevel);
|
|
mpt_SetTxPower(pAdapter, MPT_VHT, pMptCtx->TxPwrLevel);
|
|
|
|
}
|
|
} else
|
|
DBG_8192C("RFChipID < RF_TYPE_MAX, the RF chip is not supported - %d\n", pHalData->rf_chip);
|
|
|
|
ODM_ClearTxPowerTrackingState(pDM_Odm);
|
|
|
|
}
|
|
|
|
|
|
void hal_mpt_SetDataRate(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
u32 DataRate;
|
|
|
|
DataRate = MptToMgntRate(pAdapter->mppriv.rateidx);
|
|
|
|
hal_mpt_SwitchRfSetting(pAdapter);
|
|
|
|
hal_mpt_CCKTxPowerAdjust(pAdapter, pHalData->bCCKinCH14);
|
|
#ifdef CONFIG_RTL8723B
|
|
if (IS_HARDWARE_TYPE_8723B(pAdapter) || IS_HARDWARE_TYPE_8188F(pAdapter)) {
|
|
if (IS_CCK_RATE(DataRate)) {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A)
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, 0xF, 0x6);
|
|
else
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x71, 0xF, 0x6);
|
|
} else {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A)
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, 0xF, 0xE);
|
|
else
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x71, 0xF, 0xE);
|
|
}
|
|
}
|
|
|
|
if ((IS_HARDWARE_TYPE_8723BS(pAdapter) &&
|
|
((pHalData->PackageType == PACKAGE_TFBGA79) || (pHalData->PackageType == PACKAGE_TFBGA90)))) {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A)
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, 0xF, 0xE);
|
|
else
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x71, 0xF, 0xE);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
#define RF_PATH_AB 22
|
|
|
|
#ifdef CONFIG_RTL8814A
|
|
VOID mpt_ToggleIG_8814A(PADAPTER pAdapter)
|
|
{
|
|
u1Byte Path = 0;
|
|
u4Byte IGReg = rA_IGI_Jaguar, IGvalue = 0;
|
|
|
|
for (Path; Path <= ODM_RF_PATH_D; Path++) {
|
|
switch (Path) {
|
|
case ODM_RF_PATH_B:
|
|
IGReg = rB_IGI_Jaguar;
|
|
break;
|
|
case ODM_RF_PATH_C:
|
|
IGReg = rC_IGI_Jaguar2;
|
|
break;
|
|
case ODM_RF_PATH_D:
|
|
IGReg = rD_IGI_Jaguar2;
|
|
break;
|
|
default:
|
|
IGReg = rA_IGI_Jaguar;
|
|
break;
|
|
}
|
|
|
|
IGvalue = PHY_QueryBBReg(pAdapter, IGReg, bMaskByte0);
|
|
PHY_SetBBReg(pAdapter, IGReg, bMaskByte0, IGvalue+2);
|
|
PHY_SetBBReg(pAdapter, IGReg, bMaskByte0, IGvalue);
|
|
}
|
|
}
|
|
|
|
VOID mpt_SetRFPath_8814A(PADAPTER pAdapter)
|
|
{
|
|
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx;
|
|
R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */
|
|
R_ANTENNA_SELECT_CCK *p_cck_txrx;
|
|
|
|
u8 ForcedDataRate = HwRateToMRate(pAdapter->mppriv.rateidx);
|
|
u8 HtStbcCap = pAdapter->registrypriv.stbc_cap;
|
|
/*/PRT_HIGH_THROUGHPUT pHTInfo = GET_HT_INFO(pMgntInfo);*/
|
|
/*/PRT_VERY_HIGH_THROUGHPUT pVHTInfo = GET_VHT_INFO(pMgntInfo);*/
|
|
|
|
u32 ulAntennaTx = pHalData->AntennaTxPath;
|
|
u32 ulAntennaRx = pHalData->AntennaRxPath;
|
|
u8 NssforRate = MgntQuery_NssTxRate(ForcedDataRate);
|
|
|
|
if (NssforRate == RF_2TX) {
|
|
DBG_871X("===> SetAntenna 2T ForcedDataRate %d NssforRate %d AntennaTx %d\n", ForcedDataRate, NssforRate, ulAntennaTx);
|
|
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_BC:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_BC;
|
|
/*pHalData->ValidTxPath = 0x06; linux no use */
|
|
PHY_SetBBReg(pAdapter, rTxAnt_23Nsts_Jaguar2, 0x0000fff0, 0x106); /*/ 0x940[15:4]=12'b0000_0100_0011*/
|
|
break;
|
|
|
|
case ANTENNA_CD:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_CD;
|
|
/*pHalData->ValidTxPath = 0x0C;*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_23Nsts_Jaguar2, 0x0000fff0, 0x40c); /*/ 0x940[15:4]=12'b0000_0100_0011*/
|
|
break;
|
|
case ANTENNA_AB: default:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_AB;
|
|
/*pHalData->ValidTxPath = 0x03;*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_23Nsts_Jaguar2, 0x0000fff0, 0x043); /*/ 0x940[15:4]=12'b0000_0100_0011*/
|
|
break;
|
|
}
|
|
|
|
} else if (NssforRate == RF_3TX) {
|
|
DBG_871X("===> SetAntenna 3T ForcedDataRate %d NssforRate %d AntennaTx %d\n", ForcedDataRate, NssforRate, ulAntennaTx);
|
|
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_BCD:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_BCD;
|
|
/*pHalData->ValidTxPath = 0x0e;*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_23Nsts_Jaguar2, 0x0fff0000, 0x90e); /*/ 0x940[27:16]=12'b0010_0100_0111*/
|
|
break;
|
|
|
|
case ANTENNA_ABC: default:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_ABC;
|
|
/*pHalData->ValidTxPath = 0x0d;*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_23Nsts_Jaguar2, 0x0fff0000, 0x247); /*/ 0x940[27:16]=12'b0010_0100_0111*/
|
|
break;
|
|
}
|
|
|
|
} else { /*/if(NssforRate == RF_1TX)*/
|
|
DBG_871X("===> SetAntenna 1T ForcedDataRate %d NssforRate %d AntennaTx %d\n", ForcedDataRate, NssforRate, ulAntennaTx);
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_B:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_B;
|
|
/*pHalData->ValidTxPath = 0x02;*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0xf0000000, 0x4); /*/ 0xa07[7:4] = 4'b0100*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_1Nsts_Jaguar2, 0xfff00000, 0x002); /*/ 0x93C[31:20]=12'b0000_0000_0010*/
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, 0xf0, 0x2); /* 0x80C[7:4] = 4'b0010*/
|
|
break;
|
|
|
|
case ANTENNA_C:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_C;
|
|
/*pHalData->ValidTxPath = 0x04;*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0xf0000000, 0x2); /*/ 0xa07[7:4] = 4'b0010*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_1Nsts_Jaguar2, 0xfff00000, 0x004); /*/ 0x93C[31:20]=12'b0000_0000_0100*/
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, 0xf0, 0x4); /*/ 0x80C[7:4] = 4'b0100*/
|
|
break;
|
|
|
|
case ANTENNA_D:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_D;
|
|
/*pHalData->ValidTxPath = 0x08;*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0xf0000000, 0x1); /*/ 0xa07[7:4] = 4'b0001*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_1Nsts_Jaguar2, 0xfff00000, 0x008); /*/ 0x93C[31:20]=12'b0000_0000_1000*/
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, 0xf0, 0x8); /*/ 0x80C[7:4] = 4'b1000*/
|
|
break;
|
|
|
|
case ANTENNA_A: default:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_A;
|
|
/*pHalData->ValidTxPath = 0x01;*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0xf0000000, 0x8); /*/ 0xa07[7:4] = 4'b1000*/
|
|
PHY_SetBBReg(pAdapter, rTxAnt_1Nsts_Jaguar2, 0xfff00000, 0x001); /*/ 0x93C[31:20]=12'b0000_0000_0001*/
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, 0xf0, 0x1); /*/ 0x80C[7:4] = 4'b0001*/
|
|
break;
|
|
}
|
|
}
|
|
|
|
switch (ulAntennaRx) {
|
|
case ANTENNA_A:
|
|
/*pHalData->ValidRxPath = 0x01;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x11);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0C000000, 0x0);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_A_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_B_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_C_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_D_0x0[19:16] = 1, Standby mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_B:
|
|
/*pHalData->ValidRxPath = 0x02;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x22);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0C000000, 0x1);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_B_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_C_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_D_0x0[19:16] = 1, Standby mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_C:
|
|
/*pHalData->ValidRxPath = 0x04;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x44);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0C000000, 0x2);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_B_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_C_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_D_0x0[19:16] = 1, Standby mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_D:
|
|
/*pHalData->ValidRxPath = 0x08;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x88);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0C000000, 0x3);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_B_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_C_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_D_0x0[19:16] = 3, RX mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_BC:
|
|
/*pHalData->ValidRxPath = 0x06;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x66);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0f000000, 0x6);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_B_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_C_0x0[19:16] = 3, Rx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_D_0x0[19:16] = 1, Standby mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_CD:
|
|
/*pHalData->ValidRxPath = 0x0C;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0xcc);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0f000000, 0xB);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_B_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_C_0x0[19:16] = 3, Rx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_D_0x0[19:16] = 3, RX mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x5);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0xA);
|
|
break;
|
|
|
|
case ANTENNA_BCD:
|
|
/*pHalData->ValidRxPath = 0x0e;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0xee);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0f000000, 0x6);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_A_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_B_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_C_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_D_0x0[19:16] = 3, Rx mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x3);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0x8);
|
|
break;
|
|
|
|
case ANTENNA_ABCD:
|
|
/*pHalData->ValidRxPath = 0x0f;*/
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x2);
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0xff);
|
|
PHY_SetBBReg(pAdapter, 0x1000, bMaskByte2, 0x3);
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, 0x0f000000, 0x1);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_A_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_B_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_C, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_C_0x0[19:16] = 3, RX mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_D, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_D_0x0[19:16] = 3, RX mode*/
|
|
/*/ CCA related PD_delay_th*/
|
|
PHY_SetBBReg(pAdapter, rAGC_table_Jaguar, 0x0F000000, 0x3);
|
|
PHY_SetBBReg(pAdapter, rPwed_TH_Jaguar, 0x0000000F, 0x8);
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(_module_mp_, _drv_warning_, ("Unknown Rx antenna.\n"));
|
|
break;
|
|
}
|
|
|
|
PHY_Set_SecCCATH_by_RXANT_8814A(pAdapter, ulAntennaRx);
|
|
|
|
mpt_ToggleIG_8814A(pAdapter);
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
|
|
}
|
|
|
|
VOID
|
|
mpt_SetSingleTone_8814A(
|
|
IN PADAPTER pAdapter,
|
|
IN BOOLEAN bSingleTone,
|
|
IN BOOLEAN bEnPMacTx)
|
|
{
|
|
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
u1Byte StartPath = ODM_RF_PATH_A, EndPath = ODM_RF_PATH_A;
|
|
static u4Byte regIG0 = 0, regIG1 = 0, regIG2 = 0, regIG3 = 0;
|
|
|
|
if (bSingleTone) {
|
|
regIG0 = PHY_QueryBBReg(pAdapter, rA_TxScale_Jaguar, bMaskDWord); /*/ 0xC1C[31:21]*/
|
|
regIG1 = PHY_QueryBBReg(pAdapter, rB_TxScale_Jaguar, bMaskDWord); /*/ 0xE1C[31:21]*/
|
|
regIG2 = PHY_QueryBBReg(pAdapter, rC_TxScale_Jaguar2, bMaskDWord); /*/ 0x181C[31:21]*/
|
|
regIG3 = PHY_QueryBBReg(pAdapter, rD_TxScale_Jaguar2, bMaskDWord); /*/ 0x1A1C[31:21]*/
|
|
|
|
switch (pMptCtx->MptRfPath) {
|
|
case ODM_RF_PATH_A: case ODM_RF_PATH_B:
|
|
case ODM_RF_PATH_C: case ODM_RF_PATH_D:
|
|
StartPath = pMptCtx->MptRfPath;
|
|
EndPath = pMptCtx->MptRfPath;
|
|
break;
|
|
case ODM_RF_PATH_AB:
|
|
EndPath = ODM_RF_PATH_B;
|
|
break;
|
|
case ODM_RF_PATH_BC:
|
|
StartPath = ODM_RF_PATH_B;
|
|
EndPath = ODM_RF_PATH_C;
|
|
break;
|
|
case ODM_RF_PATH_ABC:
|
|
EndPath = ODM_RF_PATH_C;
|
|
break;
|
|
case ODM_RF_PATH_BCD:
|
|
StartPath = ODM_RF_PATH_B;
|
|
EndPath = ODM_RF_PATH_D;
|
|
break;
|
|
case ODM_RF_PATH_ABCD:
|
|
EndPath = ODM_RF_PATH_D;
|
|
break;
|
|
}
|
|
|
|
if (bEnPMacTx == FALSE) {
|
|
hal_mpt_SetOFDMContinuousTx(pAdapter, _TRUE);
|
|
issue_nulldata(pAdapter, NULL, 1, 3, 500);
|
|
}
|
|
|
|
PHY_SetBBReg(pAdapter, rCCAonSec_Jaguar, BIT1, 0x1); /*/ Disable CCA*/
|
|
|
|
for (StartPath; StartPath <= EndPath; StartPath++) {
|
|
PHY_SetRFReg(pAdapter, StartPath, RF_AC_Jaguar, 0xF0000, 0x2); /*/ Tx mode: RF0x00[19:16]=4'b0010 */
|
|
PHY_SetRFReg(pAdapter, StartPath, RF_AC_Jaguar, 0x1F, 0x0); /*/ Lowest RF gain index: RF_0x0[4:0] = 0*/
|
|
|
|
PHY_SetRFReg(pAdapter, StartPath, LNA_Low_Gain_3, BIT1, 0x1); /*/ RF LO enabled*/
|
|
}
|
|
|
|
PHY_SetBBReg(pAdapter, rA_TxScale_Jaguar, 0xFFE00000, 0); /*/ 0xC1C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rB_TxScale_Jaguar, 0xFFE00000, 0); /*/ 0xE1C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rC_TxScale_Jaguar2, 0xFFE00000, 0); /*/ 0x181C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rD_TxScale_Jaguar2, 0xFFE00000, 0); /*/ 0x1A1C[31:21]*/
|
|
|
|
} else {
|
|
|
|
switch (pMptCtx->MptRfPath) {
|
|
case ODM_RF_PATH_A: case ODM_RF_PATH_B:
|
|
case ODM_RF_PATH_C: case ODM_RF_PATH_D:
|
|
StartPath = pMptCtx->MptRfPath;
|
|
EndPath = pMptCtx->MptRfPath;
|
|
break;
|
|
case ODM_RF_PATH_AB:
|
|
EndPath = ODM_RF_PATH_B;
|
|
break;
|
|
case ODM_RF_PATH_BC:
|
|
StartPath = ODM_RF_PATH_B;
|
|
EndPath = ODM_RF_PATH_C;
|
|
break;
|
|
case ODM_RF_PATH_ABC:
|
|
EndPath = ODM_RF_PATH_C;
|
|
break;
|
|
case ODM_RF_PATH_BCD:
|
|
StartPath = ODM_RF_PATH_B;
|
|
EndPath = ODM_RF_PATH_D;
|
|
break;
|
|
case ODM_RF_PATH_ABCD:
|
|
EndPath = ODM_RF_PATH_D;
|
|
break;
|
|
}
|
|
|
|
for (StartPath; StartPath <= EndPath; StartPath++)
|
|
PHY_SetRFReg(pAdapter, StartPath, LNA_Low_Gain_3, BIT1, 0x0); /*// RF LO disabled*/
|
|
|
|
|
|
PHY_SetBBReg(pAdapter, rCCAonSec_Jaguar, BIT1, 0x0); /* Enable CCA*/
|
|
|
|
if (bEnPMacTx == FALSE)
|
|
hal_mpt_SetOFDMContinuousTx(pAdapter, _FALSE);
|
|
|
|
PHY_SetBBReg(pAdapter, rA_TxScale_Jaguar, bMaskDWord, regIG0); /* 0xC1C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rB_TxScale_Jaguar, bMaskDWord, regIG1); /* 0xE1C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rC_TxScale_Jaguar2, bMaskDWord, regIG2); /* 0x181C[31:21]*/
|
|
PHY_SetBBReg(pAdapter, rD_TxScale_Jaguar2, bMaskDWord, regIG3); /* 0x1A1C[31:21]*/
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
|
|
void mpt_SetRFPath_8812A(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx;
|
|
u32 ulAntennaTx, ulAntennaRx;
|
|
|
|
ulAntennaTx = pHalData->AntennaTxPath;
|
|
ulAntennaRx = pHalData->AntennaRxPath;
|
|
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_A:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_A;
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, bMaskLWord, 0x1111);
|
|
if (pHalData->RFEType == 3 && IS_HARDWARE_TYPE_8812(pAdapter))
|
|
PHY_SetBBReg(pAdapter, r_ANTSEL_SW_Jaguar, bMask_AntselPathFollow_Jaguar, 0x0);
|
|
break;
|
|
case ANTENNA_B:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_B;
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, bMaskLWord, 0x2222);
|
|
if (pHalData->RFEType == 3 && IS_HARDWARE_TYPE_8812(pAdapter))
|
|
PHY_SetBBReg(pAdapter, r_ANTSEL_SW_Jaguar, bMask_AntselPathFollow_Jaguar, 0x1);
|
|
break;
|
|
case ANTENNA_AB:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_AB;
|
|
PHY_SetBBReg(pAdapter, rTxPath_Jaguar, bMaskLWord, 0x3333);
|
|
if (pHalData->RFEType == 3 && IS_HARDWARE_TYPE_8812(pAdapter))
|
|
PHY_SetBBReg(pAdapter, r_ANTSEL_SW_Jaguar, bMask_AntselPathFollow_Jaguar, 0x0);
|
|
break;
|
|
default:
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_AB;
|
|
DBG_871X("Unknown Tx antenna.\n");
|
|
break;
|
|
}
|
|
|
|
switch (ulAntennaRx) {
|
|
u32 reg0xC50 = 0;
|
|
case ANTENNA_A:
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x11);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x1); /*/ RF_B_0x0[19:16] = 1, Standby mode*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, bCCK_RX_Jaguar, 0x0);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, BIT19|BIT18|BIT17|BIT16, 0x3);
|
|
|
|
/*/ <20121101, Kordan> To prevent gain table from not switched, asked by Ynlin.*/
|
|
reg0xC50 = PHY_QueryBBReg(pAdapter, rA_IGI_Jaguar, bMaskByte0);
|
|
PHY_SetBBReg(pAdapter, rA_IGI_Jaguar, bMaskByte0, reg0xC50+2);
|
|
PHY_SetBBReg(pAdapter, rA_IGI_Jaguar, bMaskByte0, reg0xC50);
|
|
break;
|
|
case ANTENNA_B:
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x22);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, 0xF0000, 0x1);/*/ RF_A_0x0[19:16] = 1, Standby mode */
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, bCCK_RX_Jaguar, 0x1);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, BIT19|BIT18|BIT17|BIT16, 0x3);
|
|
|
|
/*/ <20121101, Kordan> To prevent gain table from not switched, asked by Ynlin.*/
|
|
reg0xC50 = PHY_QueryBBReg(pAdapter, rB_IGI_Jaguar, bMaskByte0);
|
|
PHY_SetBBReg(pAdapter, rB_IGI_Jaguar, bMaskByte0, reg0xC50+2);
|
|
PHY_SetBBReg(pAdapter, rB_IGI_Jaguar, bMaskByte0, reg0xC50);
|
|
break;
|
|
case ANTENNA_AB:
|
|
PHY_SetBBReg(pAdapter, rRxPath_Jaguar, bMaskByte0, 0x33);
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_B, RF_AC_Jaguar, 0xF0000, 0x3); /*/ RF_B_0x0[19:16] = 3, Rx mode*/
|
|
PHY_SetBBReg(pAdapter, rCCK_RX_Jaguar, bCCK_RX_Jaguar, 0x0);
|
|
break;
|
|
default:
|
|
DBG_871X("Unknown Rx antenna.\n");
|
|
break;
|
|
}
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_RTL8723B
|
|
void mpt_SetRFPath_8723B(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
u32 ulAntennaTx, ulAntennaRx;
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
PDM_ODM_T pDM_Odm = &pHalData->odmpriv;
|
|
PODM_RF_CAL_T pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo);
|
|
|
|
ulAntennaTx = pHalData->AntennaTxPath;
|
|
ulAntennaRx = pHalData->AntennaRxPath;
|
|
|
|
if (pHalData->rf_chip >= RF_TYPE_MAX) {
|
|
DBG_8192C("This RF chip ID is not supported\n");
|
|
return;
|
|
}
|
|
|
|
switch (pAdapter->mppriv.antenna_tx) {
|
|
u8 p = 0, i = 0;
|
|
case ANTENNA_A: /*/ Actually path S1 (Wi-Fi)*/
|
|
{
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_A;
|
|
PHY_SetBBReg(pAdapter, rS0S1_PathSwitch, BIT9|BIT8|BIT7, 0x0);
|
|
PHY_SetBBReg(pAdapter, 0xB2C, BIT31, 0x0); /* AGC Table Sel*/
|
|
|
|
/*/<20130522, Kordan> 0x51 and 0x71 should be set immediately after path switched, or they might be overwritten.*/
|
|
if ((pHalData->PackageType == PACKAGE_TFBGA79) || (pHalData->PackageType == PACKAGE_TFBGA90))
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, bRFRegOffsetMask, 0x6B10E);
|
|
else
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, bRFRegOffsetMask, 0x6B04E);
|
|
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->TxIQC_8723B[ODM_RF_PATH_A][i][0];
|
|
u4Byte data = pRFCalibrateInfo->TxIQC_8723B[ODM_RF_PATH_A][i][1];
|
|
|
|
if (offset != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_8192C("Switch to S1 TxIQC(offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
|
|
}
|
|
for (i = 0; i < 2; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->RxIQC_8723B[ODM_RF_PATH_A][i][0];
|
|
u4Byte data = pRFCalibrateInfo->RxIQC_8723B[ODM_RF_PATH_A][i][1];
|
|
|
|
if (offset != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_8192C("Switch to S1 RxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case ANTENNA_B: /*/ Actually path S0 (BT)*/
|
|
{
|
|
u4Byte offset;
|
|
u4Byte data;
|
|
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_B;
|
|
PHY_SetBBReg(pAdapter, rS0S1_PathSwitch, BIT9|BIT8|BIT7, 0x5);
|
|
PHY_SetBBReg(pAdapter, 0xB2C, BIT31, 0x1); /*/ AGC Table Sel.*/
|
|
|
|
/* <20130522, Kordan> 0x51 and 0x71 should be set immediately after path switched, or they might be overwritten.*/
|
|
if ((pHalData->PackageType == PACKAGE_TFBGA79) || (pHalData->PackageType == PACKAGE_TFBGA90))
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, bRFRegOffsetMask, 0x6B10E);
|
|
else
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x51, bRFRegOffsetMask, 0x6B04E);
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
/*/ <20130603, Kordan> Because BB suppors only 1T1R, we restore IQC to S1 instead of S0.*/
|
|
offset = pRFCalibrateInfo->TxIQC_8723B[ODM_RF_PATH_A][i][0];
|
|
data = pRFCalibrateInfo->TxIQC_8723B[ODM_RF_PATH_B][i][1];
|
|
if (pRFCalibrateInfo->TxIQC_8723B[ODM_RF_PATH_B][i][0] != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_8192C("Switch to S0 TxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
/*/ <20130603, Kordan> Because BB suppors only 1T1R, we restore IQC to S1 instead of S0.*/
|
|
for (i = 0; i < 2; ++i) {
|
|
offset = pRFCalibrateInfo->RxIQC_8723B[ODM_RF_PATH_A][i][0];
|
|
data = pRFCalibrateInfo->RxIQC_8723B[ODM_RF_PATH_B][i][1];
|
|
|
|
if (pRFCalibrateInfo->RxIQC_8723B[ODM_RF_PATH_B][i][0] != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_8192C("Switch to S0 RxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
pMptCtx->MptRfPath = RF_PATH_AB;
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("Unknown Tx antenna.\n"));
|
|
break;
|
|
}
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_RTL8703B
|
|
void mpt_SetRFPath_8703B(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
u4Byte ulAntennaTx, ulAntennaRx;
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
PDM_ODM_T pDM_Odm = &pHalData->odmpriv;
|
|
PODM_RF_CAL_T pRFCalibrateInfo = &(pDM_Odm->RFCalibrateInfo);
|
|
|
|
u1Byte p = 0, i = 0;
|
|
|
|
ulAntennaTx = pHalData->AntennaTxPath;
|
|
ulAntennaRx = pHalData->AntennaRxPath;
|
|
|
|
if (pHalData->rf_chip >= RF_TYPE_MAX) {
|
|
DBG_871X("This RF chip ID is not supported\n");
|
|
return;
|
|
}
|
|
|
|
switch (pAdapter->mppriv.antenna_tx) {
|
|
|
|
case ANTENNA_A: /* Actually path S1 (Wi-Fi) */
|
|
{
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_A;
|
|
PHY_SetBBReg(pAdapter, rS0S1_PathSwitch, BIT9|BIT8|BIT7, 0x0);
|
|
PHY_SetBBReg(pAdapter, 0xB2C, BIT31, 0x0); /* AGC Table Sel*/
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->TxIQC_8703B[i][0];
|
|
u4Byte data = pRFCalibrateInfo->TxIQC_8703B[i][1];
|
|
|
|
if (offset != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_871X("Switch to S1 TxIQC(offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
|
|
}
|
|
for (i = 0; i < 2; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->RxIQC_8703B[i][0];
|
|
u4Byte data = pRFCalibrateInfo->RxIQC_8703B[i][1];
|
|
|
|
if (offset != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_871X("Switch to S1 RxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case ANTENNA_B: /* Actually path S0 (BT)*/
|
|
{
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_B;
|
|
PHY_SetBBReg(pAdapter, rS0S1_PathSwitch, BIT9|BIT8|BIT7, 0x5);
|
|
PHY_SetBBReg(pAdapter, 0xB2C, BIT31, 0x1); /* AGC Table Sel */
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->TxIQC_8703B[i][0];
|
|
u4Byte data = pRFCalibrateInfo->TxIQC_8703B[i][1];
|
|
|
|
if (pRFCalibrateInfo->TxIQC_8703B[i][0] != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_871X("Switch to S0 TxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
for (i = 0; i < 2; ++i) {
|
|
u4Byte offset = pRFCalibrateInfo->RxIQC_8703B[i][0];
|
|
u4Byte data = pRFCalibrateInfo->RxIQC_8703B[i][1];
|
|
|
|
if (pRFCalibrateInfo->RxIQC_8703B[i][0] != 0) {
|
|
PHY_SetBBReg(pAdapter, offset, bMaskDWord, data);
|
|
DBG_871X("Switch to S0 RxIQC (offset, data) = (0x%X, 0x%X)\n", offset, data);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
pMptCtx->MptRfPath = RF_PATH_AB;
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("Unknown Tx antenna.\n"));
|
|
break;
|
|
}
|
|
|
|
RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
|
|
}
|
|
#endif
|
|
|
|
|
|
VOID mpt_SetRFPath_819X(PADAPTER pAdapter)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
u4Byte ulAntennaTx, ulAntennaRx;
|
|
R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */
|
|
R_ANTENNA_SELECT_CCK *p_cck_txrx;
|
|
u1Byte r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
|
|
u1Byte chgTx = 0, chgRx = 0;
|
|
u4Byte r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;
|
|
|
|
ulAntennaTx = pHalData->AntennaTxPath;
|
|
ulAntennaRx = pHalData->AntennaRxPath;
|
|
|
|
p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val;
|
|
p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val;
|
|
|
|
p_ofdm_tx->r_ant_ht1 = 0x1;
|
|
p_ofdm_tx->r_ant_ht2 = 0x2;/*Second TX RF path is A*/
|
|
p_ofdm_tx->r_ant_non_ht = 0x3;/*/ 0x1+0x2=0x3 */
|
|
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_A:
|
|
p_ofdm_tx->r_tx_antenna = 0x1;
|
|
r_ofdm_tx_en_val = 0x1;
|
|
p_ofdm_tx->r_ant_l = 0x1;
|
|
p_ofdm_tx->r_ant_ht_s1 = 0x1;
|
|
p_ofdm_tx->r_ant_non_ht_s1 = 0x1;
|
|
p_cck_txrx->r_ccktx_enable = 0x8;
|
|
chgTx = 1;
|
|
/*/ From SD3 Willis suggestion !!! Set RF A=TX and B as standby*/
|
|
/*/if (IS_HARDWARE_TYPE_8192S(pAdapter))*/
|
|
{
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
|
|
r_ofdm_tx_en_val = 0x3;
|
|
/*/ Power save*/
|
|
/*/cosa r_ant_select_ofdm_val = 0x11111111;*/
|
|
/*/ We need to close RFB by SW control*/
|
|
if (pHalData->rf_type == RF_2T2R) {
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
|
|
}
|
|
}
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_A;
|
|
break;
|
|
case ANTENNA_B:
|
|
p_ofdm_tx->r_tx_antenna = 0x2;
|
|
r_ofdm_tx_en_val = 0x2;
|
|
p_ofdm_tx->r_ant_l = 0x2;
|
|
p_ofdm_tx->r_ant_ht_s1 = 0x2;
|
|
p_ofdm_tx->r_ant_non_ht_s1 = 0x2;
|
|
p_cck_txrx->r_ccktx_enable = 0x4;
|
|
chgTx = 1;
|
|
/*/ From SD3 Willis suggestion !!! Set RF A as standby*/
|
|
/*/if (IS_HARDWARE_TYPE_8192S(pAdapter))*/
|
|
{
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
|
|
|
|
/*/ 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table.*/
|
|
/*/ 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control*/
|
|
if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) {
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
|
|
/*/PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
|
|
}
|
|
}
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_B;
|
|
break;
|
|
case ANTENNA_AB:/*/ For 8192S*/
|
|
p_ofdm_tx->r_tx_antenna = 0x3;
|
|
r_ofdm_tx_en_val = 0x3;
|
|
p_ofdm_tx->r_ant_l = 0x3;
|
|
p_ofdm_tx->r_ant_ht_s1 = 0x3;
|
|
p_ofdm_tx->r_ant_non_ht_s1 = 0x3;
|
|
p_cck_txrx->r_ccktx_enable = 0xC;
|
|
chgTx = 1;
|
|
/*/ From SD3Willis suggestion !!! Set RF B as standby*/
|
|
/*/if (IS_HARDWARE_TYPE_8192S(pAdapter))*/
|
|
{
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
|
|
/* Disable Power save*/
|
|
/*cosa r_ant_select_ofdm_val = 0x3321333;*/
|
|
/* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control*/
|
|
if (pHalData->rf_type == RF_2T2R) {
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
|
|
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
|
|
/*/PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
|
|
}
|
|
}
|
|
pMptCtx->MptRfPath = ODM_RF_PATH_AB;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
|
|
|
|
/*// r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D
|
|
// r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D
|
|
// r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D */
|
|
switch (ulAntennaRx) {
|
|
case ANTENNA_A:
|
|
r_rx_antenna_ofdm = 0x1; /* A*/
|
|
p_cck_txrx->r_cckrx_enable = 0x0; /* default: A*/
|
|
p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A*/
|
|
chgRx = 1;
|
|
break;
|
|
case ANTENNA_B:
|
|
r_rx_antenna_ofdm = 0x2; /*/ B*/
|
|
p_cck_txrx->r_cckrx_enable = 0x1; /*/ default: B*/
|
|
p_cck_txrx->r_cckrx_enable_2 = 0x1; /*/ option: B*/
|
|
chgRx = 1;
|
|
break;
|
|
case ANTENNA_AB:/*/ For 8192S and 8192E/U...*/
|
|
r_rx_antenna_ofdm = 0x3;/*/ AB*/
|
|
p_cck_txrx->r_cckrx_enable = 0x0;/*/ default:A*/
|
|
p_cck_txrx->r_cckrx_enable_2 = 0x1;/*/ option:B*/
|
|
chgRx = 1;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
|
|
if (chgTx && chgRx) {
|
|
switch (pHalData->rf_chip) {
|
|
case RF_8225:
|
|
case RF_8256:
|
|
case RF_6052:
|
|
/*/r_ant_sel_cck_val = r_ant_select_cck_val;*/
|
|
PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /*/OFDM Tx*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /*/OFDM Tx*/
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /*/OFDM Rx*/
|
|
PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /*/OFDM Rx*/
|
|
if (IS_HARDWARE_TYPE_8192E(pAdapter)) {
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x000000F0, r_rx_antenna_ofdm); /*/OFDM Rx*/
|
|
PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x000000F0, r_rx_antenna_ofdm); /*/OFDM Rx*/
|
|
}
|
|
PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val);/*/r_ant_sel_cck_val); /CCK TxRx*/
|
|
break;
|
|
|
|
default:
|
|
DBG_871X("Unsupported RFChipID for switching antenna.\n");
|
|
break;
|
|
}
|
|
}
|
|
} /* MPT_ProSetRFPath */
|
|
|
|
|
|
void hal_mpt_SetAntenna(PADAPTER pAdapter)
|
|
|
|
{
|
|
DBG_871X("Do %s\n", __func__);
|
|
#ifdef CONFIG_RTL8814A
|
|
if (IS_HARDWARE_TYPE_8814A(pAdapter)) {
|
|
mpt_SetRFPath_8814A(pAdapter);
|
|
return;
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter)) {
|
|
mpt_SetRFPath_8812A(pAdapter);
|
|
return;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_RTL8723B
|
|
if (IS_HARDWARE_TYPE_8723B(pAdapter)) {
|
|
mpt_SetRFPath_8723B(pAdapter);
|
|
return;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_RTL8703B
|
|
if (IS_HARDWARE_TYPE_8703B(pAdapter)) {
|
|
mpt_SetRFPath_8703B(pAdapter);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* else if (IS_HARDWARE_TYPE_8821B(pAdapter))
|
|
mpt_SetRFPath_8821B(pAdapter);
|
|
Prepare for 8822B
|
|
else if (IS_HARDWARE_TYPE_8822B(Context))
|
|
mpt_SetRFPath_8822B(Context);
|
|
*/
|
|
mpt_SetRFPath_819X(pAdapter);
|
|
DBG_871X("mpt_SetRFPath_819X Do %s\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
s32 hal_mpt_SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
|
|
if (!netif_running(pAdapter->pnetdev)) {
|
|
RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
|
|
return _FAIL;
|
|
}
|
|
|
|
|
|
if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
|
|
RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
|
|
return _FAIL;
|
|
}
|
|
|
|
|
|
target_ther &= 0xff;
|
|
if (target_ther < 0x07)
|
|
target_ther = 0x07;
|
|
else if (target_ther > 0x1d)
|
|
target_ther = 0x1d;
|
|
|
|
pHalData->EEPROMThermalMeter = target_ther;
|
|
|
|
return _SUCCESS;
|
|
}
|
|
|
|
|
|
void hal_mpt_TriggerRFThermalMeter(PADAPTER pAdapter)
|
|
{
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x42, BIT17 | BIT16, 0x03);
|
|
|
|
}
|
|
|
|
|
|
u8 hal_mpt_ReadRFThermalMeter(PADAPTER pAdapter)
|
|
|
|
{
|
|
u32 ThermalValue = 0;
|
|
|
|
ThermalValue = (u1Byte)PHY_QueryRFReg(pAdapter, ODM_RF_PATH_A, 0x42, 0xfc00); /*0x42: RF Reg[15:10]*/
|
|
return (u8)ThermalValue;
|
|
|
|
}
|
|
|
|
|
|
void hal_mpt_GetThermalMeter(PADAPTER pAdapter, u8 *value)
|
|
{
|
|
#if 0
|
|
fw_cmd(pAdapter, IOCMD_GET_THERMAL_METER);
|
|
rtw_msleep_os(1000);
|
|
fw_cmd_data(pAdapter, value, 1);
|
|
*value &= 0xFF;
|
|
#else
|
|
hal_mpt_TriggerRFThermalMeter(pAdapter);
|
|
rtw_msleep_os(1000);
|
|
*value = hal_mpt_ReadRFThermalMeter(pAdapter);
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
void hal_mpt_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
|
|
pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
|
|
|
|
if (bStart) {/*/ Start Single Carrier.*/
|
|
RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test start\n"));
|
|
/*/ Start Single Carrier.*/
|
|
/*/ 1. if OFDM block on?*/
|
|
if (!PHY_QueryBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 1); /*set OFDM block on*/
|
|
|
|
/*/ 2. set CCK test mode off, set to CCK normal mode*/
|
|
PHY_SetBBReg(pAdapter, rCCK0_System, bCCKBBMode, 0);
|
|
|
|
/*/ 3. turn on scramble setting*/
|
|
PHY_SetBBReg(pAdapter, rCCK0_System, bCCKScramble, 1);
|
|
|
|
/*/ 4. Turn On Continue Tx and turn off the other test modes.*/
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter) || IS_HARDWARE_TYPE_8814A(pAdapter) /*|| IS_HARDWARE_TYPE_8822B(pAdapter)*/)
|
|
PHY_SetBBReg(pAdapter, rSingleTone_ContTx_Jaguar, BIT18|BIT17|BIT16, OFDM_SingleCarrier);
|
|
else
|
|
#endif
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_SingleCarrier);
|
|
|
|
} else {
|
|
/*/ Stop Single Carrier.*/
|
|
/*/ Stop Single Carrier.*/
|
|
/*/ Turn off all test modes.*/
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter) || IS_HARDWARE_TYPE_8814A(pAdapter) /*|| IS_HARDWARE_TYPE_8822B(pAdapter)*/)
|
|
PHY_SetBBReg(pAdapter, rSingleTone_ContTx_Jaguar, BIT18|BIT17|BIT16, OFDM_ALL_OFF);
|
|
else
|
|
#endif
|
|
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_ALL_OFF);
|
|
|
|
rtw_msleep_os(10);
|
|
/*/BB Reset*/
|
|
PHY_SetBBReg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
|
|
PHY_SetBBReg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
|
|
}
|
|
}
|
|
|
|
|
|
void hal_mpt_SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.MptCtx);
|
|
u4Byte ulAntennaTx = pHalData->AntennaTxPath;
|
|
static u4Byte regRF = 0, regBB0 = 0, regBB1 = 0, regBB2 = 0, regBB3 = 0;
|
|
u8 rfPath;
|
|
|
|
switch (ulAntennaTx) {
|
|
case ANTENNA_B:
|
|
rfPath = ODM_RF_PATH_B;
|
|
break;
|
|
case ANTENNA_C:
|
|
rfPath = ODM_RF_PATH_C;
|
|
break;
|
|
case ANTENNA_D:
|
|
rfPath = ODM_RF_PATH_D;
|
|
break;
|
|
case ANTENNA_A:
|
|
default:
|
|
rfPath = ODM_RF_PATH_A;
|
|
break;
|
|
}
|
|
|
|
pAdapter->mppriv.MptCtx.bSingleTone = bStart;
|
|
if (bStart) {
|
|
/*/ Start Single Tone.*/
|
|
/*/ <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu)*/
|
|
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
|
|
regRF = PHY_QueryRFReg(pAdapter, rfPath, LNA_Low_Gain_3, bRFRegOffsetMask);
|
|
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, LNA_Low_Gain_3, BIT1, 0x1); /*/ RF LO enabled*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
|
|
} else if (IS_HARDWARE_TYPE_8192E(pAdapter)) { /*/ USB need to do RF LO disable first, PCIE isn't required to follow this order.*/
|
|
/*/Set MAC REG 88C: Prevent SingleTone Fail*/
|
|
PHY_SetMacReg(pAdapter, 0x88C, 0xF00000, 0xF);
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x1); /*/ RF LO disabled*/
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x2); /*/ Tx mode*/
|
|
} else if (IS_HARDWARE_TYPE_8723B(pAdapter)) {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x2); /*/ Tx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x56, 0xF, 0x1); /*/ RF LO enabled*/
|
|
} else {
|
|
/*/ S0/S1 both use PATH A to configure*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x2); /*/ Tx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x76, 0xF, 0x1); /*/ RF LO enabled*/
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8703B(pAdapter)) {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x2); /* Tx mode */
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x53, 0xF000, 0x1); /* RF LO enabled */
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8188F(pAdapter)) {
|
|
/*Set BB REG 88C: Prevent SingleTone Fail*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_AnalogParameter4, 0xF00000, 0xF);
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x1);
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x2);
|
|
|
|
} else if (IS_HARDWARE_TYPE_JAGUAR(pAdapter)) {
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
|
|
u1Byte p = ODM_RF_PATH_A;
|
|
|
|
regRF = PHY_QueryRFReg(pAdapter, ODM_RF_PATH_A, RF_AC_Jaguar, bRFRegOffsetMask);
|
|
regBB0 = PHY_QueryBBReg(pAdapter, rA_RFE_Pinmux_Jaguar, bMaskDWord);
|
|
regBB1 = PHY_QueryBBReg(pAdapter, rB_RFE_Pinmux_Jaguar, bMaskDWord);
|
|
regBB2 = PHY_QueryBBReg(pAdapter, rA_RFE_Pinmux_Jaguar+4, bMaskDWord);
|
|
regBB3 = PHY_QueryBBReg(pAdapter, rB_RFE_Pinmux_Jaguar+4, bMaskDWord);
|
|
|
|
PHY_SetBBReg(pAdapter, rOFDMCCKEN_Jaguar, BIT29|BIT28, 0x0); /*/ Disable CCK and OFDM*/
|
|
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_AB) {
|
|
for (p = ODM_RF_PATH_A; p <= ODM_RF_PATH_B; ++p) {
|
|
PHY_SetRFReg(pAdapter, p, RF_AC_Jaguar, 0xF0000, 0x2); /*/ Tx mode: RF0x00[19:16]=4'b0010 */
|
|
PHY_SetRFReg(pAdapter, p, RF_AC_Jaguar, 0x1F, 0x0); /*/ Lowest RF gain index: RF_0x0[4:0] = 0*/
|
|
PHY_SetRFReg(pAdapter, p, LNA_Low_Gain_3, BIT1, 0x1); /*/ RF LO enabled*/
|
|
}
|
|
} else {
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC_Jaguar, 0xF0000, 0x2); /*/ Tx mode: RF0x00[19:16]=4'b0010 */
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC_Jaguar, 0x1F, 0x0); /*/ Lowest RF gain index: RF_0x0[4:0] = 0*/
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x1); /*/ RF LO enabled*/
|
|
}
|
|
|
|
PHY_SetBBReg(pAdapter, rA_RFE_Pinmux_Jaguar, 0xFF00F0, 0x77007); /*/ 0xCB0[[23:16, 7:4] = 0x77007*/
|
|
PHY_SetBBReg(pAdapter, rB_RFE_Pinmux_Jaguar, 0xFF00F0, 0x77007); /*/ 0xCB0[[23:16, 7:4] = 0x77007*/
|
|
|
|
if (pHalData->ExternalPA_5G) {
|
|
PHY_SetBBReg(pAdapter, rA_RFE_Pinmux_Jaguar+4, 0xFF00000, 0x12); /*/ 0xCB4[23:16] = 0x12*/
|
|
PHY_SetBBReg(pAdapter, rB_RFE_Pinmux_Jaguar+4, 0xFF00000, 0x12); /*/ 0xEB4[23:16] = 0x12*/
|
|
} else if (pHalData->ExternalPA_2G) {
|
|
PHY_SetBBReg(pAdapter, rA_RFE_Pinmux_Jaguar+4, 0xFF00000, 0x11); /*/ 0xCB4[23:16] = 0x11*/
|
|
PHY_SetBBReg(pAdapter, rB_RFE_Pinmux_Jaguar+4, 0xFF00000, 0x11); /*/ 0xEB4[23:16] = 0x11*/
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef CONFIG_RTL8814A
|
|
else if (IS_HARDWARE_TYPE_8814A(pAdapter))
|
|
mpt_SetSingleTone_8814A(pAdapter, TRUE, FALSE);
|
|
#endif
|
|
else /*/ Turn On SingleTone and turn off the other test modes.*/
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_SingleTone);
|
|
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
|
|
} else {/*/ Stop Single Ton e.*/
|
|
|
|
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, regRF);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
|
|
} else if (IS_HARDWARE_TYPE_8192E(pAdapter)) {
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x3);/*/ Tx mode*/
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x0);/*/ RF LO disabled */
|
|
/*/ RESTORE MAC REG 88C: Enable RF Functions*/
|
|
PHY_SetMacReg(pAdapter, 0x88C, 0xF00000, 0x0);
|
|
} else if (IS_HARDWARE_TYPE_8723B(pAdapter)) {
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A) {
|
|
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x3); /*/ Rx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x56, 0xF, 0x0); /*/ RF LO disabled*/
|
|
} else {
|
|
/*/ S0/S1 both use PATH A to configure*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x3); /*/ Rx mode*/
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x76, 0xF, 0x0); /*/ RF LO disabled*/
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8703B(pAdapter)) {
|
|
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_A) {
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, RF_AC, 0xF0000, 0x3); /* Rx mode */
|
|
PHY_SetRFReg(pAdapter, ODM_RF_PATH_A, 0x53, 0xF000, 0x0); /* RF LO disabled */
|
|
}
|
|
} else if (IS_HARDWARE_TYPE_8188F(pAdapter)) {
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, RF_AC, 0xF0000, 0x3); /*Tx mode*/
|
|
PHY_SetRFReg(pAdapter, pMptCtx->MptRfPath, LNA_Low_Gain_3, BIT1, 0x0); /*RF LO disabled*/
|
|
/*Set BB REG 88C: Prevent SingleTone Fail*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_AnalogParameter4, 0xF00000, 0xc);
|
|
} else if (IS_HARDWARE_TYPE_JAGUAR(pAdapter)) {
|
|
#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A)
|
|
u1Byte p = ODM_RF_PATH_A;
|
|
|
|
PHY_SetBBReg(pAdapter, rOFDMCCKEN_Jaguar, BIT29|BIT28, 0x3); /*/ Disable CCK and OFDM*/
|
|
|
|
if (pMptCtx->MptRfPath == ODM_RF_PATH_AB) {
|
|
for (p = ODM_RF_PATH_A; p <= ODM_RF_PATH_B; ++p) {
|
|
PHY_SetRFReg(pAdapter, p, RF_AC_Jaguar, bRFRegOffsetMask, regRF);
|
|
PHY_SetRFReg(pAdapter, p, LNA_Low_Gain_3, BIT1, 0x0); /*/ RF LO disabled*/
|
|
}
|
|
} else {
|
|
PHY_SetRFReg(pAdapter, p, RF_AC_Jaguar, bRFRegOffsetMask, regRF);
|
|
PHY_SetRFReg(pAdapter, p, LNA_Low_Gain_3, BIT1, 0x0); /*/ RF LO disabled*/
|
|
}
|
|
|
|
PHY_SetBBReg(pAdapter, rA_RFE_Pinmux_Jaguar, bMaskDWord, regBB0);
|
|
PHY_SetBBReg(pAdapter, rB_RFE_Pinmux_Jaguar, bMaskDWord, regBB1);
|
|
PHY_SetBBReg(pAdapter, rA_RFE_Pinmux_Jaguar+4, bMaskDWord, regBB2);
|
|
PHY_SetBBReg(pAdapter, rB_RFE_Pinmux_Jaguar+4, bMaskDWord, regBB3);
|
|
#endif
|
|
}
|
|
#ifdef CONFIG_RTL8814A
|
|
else if (IS_HARDWARE_TYPE_8814A(pAdapter))
|
|
mpt_SetSingleTone_8814A(pAdapter, FALSE, FALSE);
|
|
|
|
else/*/ Turn off all test modes.*/
|
|
PHY_SetBBReg(pAdapter, rSingleTone_ContTx_Jaguar, BIT18|BIT17|BIT16, OFDM_ALL_OFF);
|
|
#endif
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
|
|
}
|
|
}
|
|
|
|
|
|
void hal_mpt_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
|
|
if (bStart) {/* Start Carrier Suppression.*/
|
|
RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
|
|
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
|
|
/*/ 1. if CCK block on?*/
|
|
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
|
|
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/*set CCK block on*/
|
|
|
|
/*/Turn Off All Test Mode*/
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter) || IS_HARDWARE_TYPE_8814A(pAdapter) /*|| IS_HARDWARE_TYPE_8822B(pAdapter)*/)
|
|
PHY_SetBBReg(pAdapter, 0x914, BIT18|BIT17|BIT16, OFDM_ALL_OFF);/* rSingleTone_ContTx_Jaguar*/
|
|
else
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_ALL_OFF);
|
|
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /*/transmit mode*/
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /*/turn off scramble setting*/
|
|
|
|
/*/Set CCK Tx Test Rate*/
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /*/Set FTxRate to 1Mbps*/
|
|
}
|
|
|
|
/*Set for dynamic set Power index*/
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
|
|
} else {/* Stop Carrier Suppression.*/
|
|
RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
|
|
|
|
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /*normal mode*/
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /*turn on scramble setting*/
|
|
|
|
/*BB Reset*/
|
|
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
|
|
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
|
|
}
|
|
/*Stop for dynamic set Power index*/
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
}
|
|
DBG_871X("\n MPT_ProSetCarrierSupp() is finished.\n");
|
|
}
|
|
|
|
void hal_mpt_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
u32 cckrate;
|
|
|
|
if (bStart) {
|
|
RT_TRACE(_module_mp_, _drv_alert_,
|
|
("SetCCKContinuousTx: test start\n"));
|
|
|
|
/*/ 1. if CCK block on?*/
|
|
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
|
|
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/*set CCK block on*/
|
|
|
|
/*/Turn Off All Test Mode*/
|
|
if (IS_HARDWARE_TYPE_JAGUAR_AND_JAGUAR2(pAdapter))
|
|
PHY_SetBBReg(pAdapter, 0x914, BIT18|BIT17|BIT16, OFDM_ALL_OFF);/*rSingleTone_ContTx_Jaguar*/
|
|
else
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_ALL_OFF);
|
|
|
|
/*/Set CCK Tx Test Rate*/
|
|
|
|
cckrate = pAdapter->mppriv.rateidx;
|
|
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /*/transmit mode*/
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /*/turn on scramble setting*/
|
|
|
|
if (!IS_HARDWARE_TYPE_JAGUAR_AND_JAGUAR2(pAdapter)) {
|
|
PHY_SetBBReg(pAdapter, 0xa14, 0x300, 0x3); /* rCCK0_RxHP 0xa15[1:0] = 11 force cck rxiq = 0*/
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x1); /*/ 0xc08[16] = 1 force ofdm rxiq = ofdm txiq*/
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, BIT14, 1);
|
|
PHY_SetBBReg(pAdapter, 0x0B34, BIT14, 1);
|
|
}
|
|
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
|
|
} else {
|
|
RT_TRACE(_module_mp_, _drv_info_,
|
|
("SetCCKContinuousTx: test stop\n"));
|
|
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /*/normal mode*/
|
|
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /*/turn on scramble setting*/
|
|
|
|
if (!IS_HARDWARE_TYPE_JAGUAR(pAdapter) && !IS_HARDWARE_TYPE_8814A(pAdapter) /* && !IS_HARDWARE_TYPE_8822B(pAdapter) */) {
|
|
PHY_SetBBReg(pAdapter, 0xa14, 0x300, 0x0);/* rCCK0_RxHP 0xa15[1:0] = 2b00*/
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x0); /*/ 0xc08[16] = 0*/
|
|
|
|
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, BIT14, 0);
|
|
PHY_SetBBReg(pAdapter, 0x0B34, BIT14, 0);
|
|
}
|
|
|
|
/*/BB Reset*/
|
|
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
|
|
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
|
|
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
}
|
|
|
|
pAdapter->mppriv.MptCtx.bCckContTx = bStart;
|
|
pAdapter->mppriv.MptCtx.bOfdmContTx = _FALSE;
|
|
}
|
|
|
|
void hal_mpt_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
|
|
|
|
if (bStart) {
|
|
RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));/*/ 1. if OFDM block on?*/
|
|
if (!PHY_QueryBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
|
|
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 1);/*/set OFDM block on*/
|
|
|
|
/*/ 2. set CCK test mode off, set to CCK normal mode*/
|
|
PHY_SetBBReg(pAdapter, rCCK0_System, bCCKBBMode, 0);
|
|
|
|
/*/ 3. turn on scramble setting*/
|
|
PHY_SetBBReg(pAdapter, rCCK0_System, bCCKScramble, 1);
|
|
|
|
if (!IS_HARDWARE_TYPE_JAGUAR(pAdapter) && !IS_HARDWARE_TYPE_8814A(pAdapter) /*&& !IS_HARDWARE_TYPE_8822B(pAdapter)*/) {
|
|
PHY_SetBBReg(pAdapter, 0xa14, 0x300, 0x3); /* rCCK0_RxHP 0xa15[1:0] = 2b'11*/
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x1); /* 0xc08[16] = 1*/
|
|
}
|
|
|
|
/*/ 4. Turn On Continue Tx and turn off the other test modes.*/
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter) || IS_HARDWARE_TYPE_8814A(pAdapter) /*|| IS_HARDWARE_TYPE_8822B(pAdapter)*/)
|
|
PHY_SetBBReg(pAdapter, 0x914, BIT18|BIT17|BIT16, OFDM_ContinuousTx);/*rSingleTone_ContTx_Jaguar*/
|
|
else
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_ContinuousTx);
|
|
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
|
|
|
|
} else {
|
|
RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test stop\n"));
|
|
if (IS_HARDWARE_TYPE_JAGUAR(pAdapter) || IS_HARDWARE_TYPE_8814A(pAdapter) /*|| IS_HARDWARE_TYPE_8822B(pAdapter)*/)
|
|
PHY_SetBBReg(pAdapter, 0x914, BIT18|BIT17|BIT16, OFDM_ALL_OFF);
|
|
else
|
|
PHY_SetBBReg(pAdapter, rOFDM1_LSTF, BIT30|BIT29|BIT28, OFDM_ALL_OFF);
|
|
/*/Delay 10 ms*/
|
|
rtw_msleep_os(10);
|
|
|
|
if (!IS_HARDWARE_TYPE_JAGUAR(pAdapter) && !IS_HARDWARE_TYPE_8814A(pAdapter) /*&&! IS_HARDWARE_TYPE_8822B(pAdapter)*/) {
|
|
PHY_SetBBReg(pAdapter, 0xa14, 0x300, 0x0);/*/ 0xa15[1:0] = 0*/
|
|
PHY_SetBBReg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x0);/*/ 0xc08[16] = 0*/
|
|
}
|
|
|
|
/*/BB Reset*/
|
|
PHY_SetBBReg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
|
|
PHY_SetBBReg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
|
|
|
|
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
|
|
}
|
|
|
|
pAdapter->mppriv.MptCtx.bCckContTx = _FALSE;
|
|
pAdapter->mppriv.MptCtx.bOfdmContTx = bStart;
|
|
}
|
|
|
|
void hal_mpt_SetContinuousTx(PADAPTER pAdapter, u8 bStart)
|
|
{
|
|
RT_TRACE(_module_mp_, _drv_info_,
|
|
("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
|
|
|
|
pAdapter->mppriv.MptCtx.bStartContTx = bStart;
|
|
|
|
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
|
|
hal_mpt_SetCCKContinuousTx(pAdapter, bStart);
|
|
else if (pAdapter->mppriv.rateidx >= MPT_RATE_6M)
|
|
hal_mpt_SetOFDMContinuousTx(pAdapter, bStart);
|
|
}
|
|
|
|
#endif /* CONFIG_MP_INCLUDE*/
|
|
|