rtl8723cs/include/drv_conf.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef __DRV_CONF_H__
#define __DRV_CONF_H__
#include "autoconf.h"
#include "hal_ic_cfg.h"

#if defined (PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)

#error "Shall be Linux or Windows, but not both!\n"

#endif

//Older Android kernel doesn't has CONFIG_ANDROID defined,
//add this to force CONFIG_ANDROID defined
#ifdef CONFIG_PLATFORM_ANDROID
#ifndef CONFIG_ANDROID
#define CONFIG_ANDROID
#endif
#endif

#ifdef CONFIG_ANDROID
//Some Android build will restart the UI while non-printable ascii is passed
//between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
//for Android here. If you are sure there is no risk on your system about this,
//mask this macro define to support non-printable ascii ssid.
//#define CONFIG_VALIDATE_SSID

//Android expect dbm as the rx signal strength unit
#define CONFIG_SIGNAL_DISPLAY_DBM
#endif

/*
#if defined(CONFIG_HAS_EARLYSUSPEND) && defined (CONFIG_RESUME_IN_WORKQUEUE)
	#warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
	#undef CONFIG_RESUME_IN_WORKQUEUE
#endif

#if defined(CONFIG_ANDROID_POWER) && defined (CONFIG_RESUME_IN_WORKQUEUE)
	#warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
	#undef CONFIG_RESUME_IN_WORKQUEUE
#endif
*/

#ifdef CONFIG_RESUME_IN_WORKQUEUE //this can be removed, because there is no case for this...
	#if !defined( CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
	#error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
	#error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
	#endif
#endif

//About USB VENDOR REQ
#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX) 
	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
	#define CONFIG_USB_VENDOR_REQ_MUTEX
#endif
#if defined(CONFIG_VENDOR_REQ_RETRY) &&  !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
	#define CONFIG_USB_VENDOR_REQ_MUTEX
#endif

#if !defined(CONFIG_AP_MODE) && defined(CONFIG_DFS_MASTER)
	#warning "undef CONFIG_DFS_MASTER because CONFIG_AP_MODE is not defined"
	#undef CONFIG_DFS_MASTER
#endif

#define DYNAMIC_CAMID_ALLOC

#define RTW_SCAN_SPARSE_MIRACAST 1
#define RTW_SCAN_SPARSE_BG 0

#ifndef CONFIG_RTW_HIQ_FILTER
	#define CONFIG_RTW_HIQ_FILTER 1
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_EN
	#define CONFIG_RTW_ADAPTIVITY_EN 0
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_MODE
	#define CONFIG_RTW_ADAPTIVITY_MODE 0
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_DML
	#define CONFIG_RTW_ADAPTIVITY_DML 0
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_DC_BACKOFF
	#define CONFIG_RTW_ADAPTIVITY_DC_BACKOFF 2
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_TH_L2H_INI
	#define CONFIG_RTW_ADAPTIVITY_TH_L2H_INI 0
#endif

#ifndef CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF
	#define CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF 0
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_A
	#define CONFIG_RTW_TARGET_TX_PWR_2G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_B
	#define CONFIG_RTW_TARGET_TX_PWR_2G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_C
	#define CONFIG_RTW_TARGET_TX_PWR_2G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_D
	#define CONFIG_RTW_TARGET_TX_PWR_2G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_A
	#define CONFIG_RTW_TARGET_TX_PWR_5G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_B
	#define CONFIG_RTW_TARGET_TX_PWR_5G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_C
	#define CONFIG_RTW_TARGET_TX_PWR_5G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_D
	#define CONFIG_RTW_TARGET_TX_PWR_5G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1}
#endif

#ifndef CONFIG_RTW_AMPLIFIER_TYPE_2G
	#define CONFIG_RTW_AMPLIFIER_TYPE_2G 0
#endif

#ifndef CONFIG_RTW_AMPLIFIER_TYPE_5G
	#define CONFIG_RTW_AMPLIFIER_TYPE_5G 0
#endif

#ifndef CONFIG_RTW_RFE_TYPE
	#define CONFIG_RTW_RFE_TYPE 64
#endif

#ifndef CONFIG_RTW_GLNA_TYPE
	#define CONFIG_RTW_GLNA_TYPE 0
#endif

#ifndef CONFIG_RTW_PLL_REF_CLK_SEL
	#define CONFIG_RTW_PLL_REF_CLK_SEL 0x0F
#endif

#define MACID_NUM_SW_LIMIT 32
#define SEC_CAM_ENT_NUM_SW_LIMIT 32

#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
	#define CONFIG_IEEE80211_BAND_5GHZ
#endif

/*
	Mark CONFIG_DEAUTH_BEFORE_CONNECT by Arvin 2015/07/20
	If the failure of Wi-Fi connection is due to some irregular disconnection behavior (like unplug dongle,
	power down etc.) in last time, we can unmark this flag to avoid some unpredictable response from AP.
*/
/*#define CONFIG_DEAUTH_BEFORE_CONNECT */

/*#define CONFIG_WEXT_DONT_JOIN_BYSSID	*/
//#include <rtl871x_byteorder.h>


/*#define CONFIG_DOSCAN_IN_BUSYTRAFFIC	*/

#endif // __DRV_CONF_H__